Filter by category
Dektite pipe flashings for sealing pipes, flues and cables where they pass through the roof. The range covers the Deks Dektite Premium for 5 to 127 mm pipes, the Dektite Solar and solar twin port for cable runs, and Deks Rapid Flash for tile and metal roofs. Pickup in Truganina or courier Australia-wide.
Dektite pipe flashing sizes we stock
A Dektite is a rubber cone on a soft base. The cone seals around the pipe and the base dresses down over the roof sheet, so the penetration stays watertight. Choose by the outside diameter of the pipe and the roof it goes through.
- Deks Dektite Premium 5 to 127 mm: black EPDM cone on a 221 x 221 mm aluminium base, for metal, plastic, polycarbonate and glass roof profiles.
- Deks Dektite Solar 5 to 55 mm: seals a small pipe through a metal roof, with two extra ports for electrical or solar cables.
- Dektite solar twin port 0 to 35 mm: two cable ports in one flashing on a 100 x 100 mm base, for roof pitches from 0 to 45 degrees.
- Deks Rapid Flash 6 to 50 mm and 50 to 170 mm: an EPDM cone on a fully adhesive, stretchable base reinforced with aluminium mesh, for tile and metal roofs.
Measure the pipe, not the hole, and pick the flashing whose range covers it with room to spare. For flues and large exhausts, the 50 to 170 mm Rapid Flash is the size to check. Other pipe flashings, including the Aztec Masterflash range, are in metal roof flashing and tile roof flashing.
Dektite FAQs
What size Dektite do I need?
Measure the outside diameter of the pipe and choose the Dektite whose range covers it, for example 5 to 127 mm for most vent pipes.
Can I use a Dektite on a tiled roof?
Use the Deks Rapid Flash. Its adhesive base stretches and dresses over tile as well as metal profiles.
Which Dektite suits solar cables?
The Dektite solar twin port takes two cables up to 35 mm each. The Dektite Solar 5 to 55 mm seals a small pipe and has two extra cable ports.