Fascia and Accessories
Filter by category
Colorbond fascia and Zincalume steel fascia for a straight, low-maintenance roof edge, cut to length in 0.55 mm BMT steel. The range includes fascia covers for old timber boards, internal and external corners, barge mould, and the brackets and clips that hold it all in line. Pick up in Truganina or order delivery.
Steel fascia, fascia covers and the fittings
Steel fascia is rolled at 0.55 mm base metal thickness, with a 0.70 mm heavy-duty option listed for exposed sites. Order it in a Colorbond colour to match the roof and gutters, including the classic, matt and ultra ranges, or in Zincalume, cut to the length of each run. If you want a ready-made length, the 6 metre fascia in Monument comes pre-painted.
Replacing tired timber fascia does not always mean pulling it off. A Colorbond fascia cover fits over the existing timber boards, and you can trim it to the board height on site for a neat finish.
At the corners, 90 degree internal and external corners close the joint so water cannot get in behind the fascia. On a gable, steel fascia barge mould finishes the rake edge and comes in left and right hand. Fascia rafter brackets fix the fascia to the rafters or trusses, and fascia suspension clips help keep the boards aligned.
Before ordering, measure each side of the house separately and note every internal and external corner. That way the lengths, corners and brackets arrive in one delivery or one pickup, and you are not stopping halfway along the roofline.
Fascia carries the gutter, so plan the two together. Choose a gutter profile in guttering, match the colours on the Colorbond colour chart, and find the brackets that fix gutters to steel fascia in guttering accessories. Over-fascia vents for roof space airflow are in roof ventilation.
Colorbond fascia FAQs
What is Colorbond fascia?
It is steel fascia made from pre-painted Colorbond steel, fixed along the roof edge in place of a timber board. It carries the gutter brackets and will not warp the way timber can.
What is the difference between steel fascia and a fascia cover?
Steel fascia replaces the timber board. A fascia cover is a steel cover that fits over existing timber fascia, which suits a job where the timber is still sound but looks worn.
Can I match the fascia to my gutters and roof?
Yes. Steel fascia comes in the Colorbond colour range or Zincalume, so you can order it in the same colour as the gutter and roof. Check the colour chart before you order.
What thickness is the steel fascia?
The standard fascia is 0.55 mm BMT, and a 0.70 mm heavy-duty option is listed for sites that need extra strength.