Overview

The Dulux Avista Water Based Colour Tint is a concentrated, water-based colourant for tinting the Dulux Avista Waterbased Tintable Sealer Base and the Waterbased Epoxy flooring system. A 400ml tin provides the exact amount to colour one pail of water-based tintable base or one 8L epoxy kit.

The water-based formulation has low VOC and low odour, which makes it suitable for interior coloured concrete and epoxy floors. It integrates with the Avista water-based sealer and epoxy systems for even, reliable colour, and the palette covers popular shades for Australian homes and commercial spaces.

Key Features

• One 400ml tin colours one 15L pail of WB Tintable Base or one 8L epoxy kit
• Water-based with low VOC and minimal odour
• UV-stable pigments that resist fading
• Works with both the WB Tintable Base and Waterbased Epoxy
• Simple to add, no dispensing equipment
• Curated palette for Australian homes and commercial spaces

Specifications

• Pack size: 400ml tin
• Type: water-based concentrated colourant
• Dosing: one tin per 15L pail of WB Tintable Base, or one 8L epoxy kit
• Compatibility: Dulux Avista WB Tintable Base and Waterbased Epoxy
• Mixing: add after Part A and Part B are combined for epoxy

Applications

• Tinting the WB Tintable Sealer Base for driveways and paths
• Coloured epoxy floors in garages and workshops
• Interior coloured concrete where low odour matters
• Commercial coloured concrete and epoxy floors

What You Need to Complete the Job

Add the full tin to a pail of Waterbased Tintable Sealer Base and mix thoroughly. For an epoxy floor, add the tint to the Waterbased Epoxy Part A after the Part B hardener is combined. The tint does not change the pot life or curing. Coatings are in the Concrete Sealers range.

Frequently Asked Questions

Can I use this tint with the solvent-based tintable sealer?

No. This is a water-based tint for the water-based system. For solvent-based sealers, use the Dulux Avista Sealer Colour Tint 1L. Water-based tints will not mix properly with solvent-based products.

Will the tinted colour look the same as the colour card?

The colour card is a close representation, but the final shade is influenced by the concrete substrate colour, porosity, number of coats and application technique. For critical colour matching, apply a test patch first.

Does tinting affect the performance of the sealer or epoxy?

No. At the recommended ratio the tint integrates fully into the sealer or epoxy without affecting adhesion, durability, UV resistance or curing characteristics. It does not change the pot life of the epoxy, and for a sealer it does not alter the recoat times or the finished sheen level, so you can plan the job exactly as you would with a clear product.