Overview

The Holman Storm PVC Elbow M&F 90mm 45 degree is a male-female elbow for 90mm stormwater pipe. It changes the direction of a pipe run through 45 degrees with a male spigot on one end and a female socket on the other, so it can connect directly into a female socket or fitting without a separate coupling.

It is made from quality recycled PVC and is used for stormwater and rainwater drainage, including running pipe from rainwater tanks and diverting grey water into the garden. The fitting is solvent welded into place and complies with AS/NZS 1254 for stormwater fittings.

Key Features

• 90mm male-female elbow with a 45 degree turn
• Made from quality recycled PVC
• Solvent weld connection for a watertight joint
• 45 degrees to guide drainpipes around corners
• Ideal for rainwater tank and grey water plumbing
• Complies with AS/NZS 1254, AMI 70007

Specifications

• Size: 90mm nominal
• Connection: male x female
• Angle: 45 degrees
• Material: recycled PVC
• Jointing: solvent cement
• Standard: AS/NZS 1254, AMI 70007

Applications

• Stepping a 90mm stormwater pipe around a corner
• Plumbing from rainwater tanks
• Diverting grey water into the garden
• Above and below ground stormwater drainage

What You Need to Complete the Job

Cut the pipe ends square, dry-fit the elbow, then apply solvent cement to both surfaces and push the joint home with a quarter-turn twist. Use it with the 90mm stormwater pipe and cement with Bostik Pipe Cement Type N. The full range of 90mm stormwater fittings is in the PVC Fittings range.

Frequently Asked Questions

Why use an M&F elbow instead of F&F?

The M&F elbow has a male spigot on one end and a female socket on the other, so it can connect directly into a female socket or fitting without an extra coupling. That makes it useful for connecting a branch, a pump outlet or a fitting where the joint count needs to stay low.

Can this be used for rainwater tank plumbing?

Yes. A 45 degree M&F elbow is a common fitting for running pipe from a rainwater tank outlet into the garden or a soak pit. The male end can connect into a female fitting at the tank outlet, and the female end takes the pipe run away.

Is it suitable for grey water diversion?

Yes. The fitting is used for diverting grey water into the garden, guiding the 90mm pipe from the source to the distribution point. It is made for stormwater and rainwater drainage and complies with AS/NZS 1254, so it suits the plumbing in these systems.

Is this the same as a DWV elbow?

No. This is a stormwater fitting to AS/NZS 1254, while DWV fittings are made to AS/NZS 1260. The two systems use different pipe and socket standards, so keep stormwater fittings with stormwater pipe and DWV fittings with DWV pipe.