Overview

The Holman Storm PVC Elbow F&F 90mm 15 degree is a low angle female-female elbow for 90mm stormwater pipe. It makes a gentle change of direction in a pipe run, which keeps the flow moving and avoids the sharper flow restriction of a 90 degree bend. It is the fitting to use when a pipe only needs a slight step to clear an obstruction or line up with an outlet.

It is made from quality recycled PVC and used for stormwater and rainwater drainage in residential and commercial buildings. Both ends are female sockets, and the fitting is solvent welded into place. It complies with AS/NZS 1254 for stormwater fittings.

Key Features

• 90mm female-female elbow with a 15 degree turn
• Low angle keeps flow moving through the run
• Made from quality recycled PVC
• Solvent weld connection for a watertight joint
• Suitable for above and below ground applications
• Complies with AS/NZS 1254, AMI 70007

Specifications

• Size: 90mm nominal
• Connection: female x female
• Angle: 15 degrees
• Material: recycled PVC
• Jointing: solvent cement
• Standard: AS/NZS 1254, AMI 70007

Applications

• Gentle changes of direction in a 90mm stormwater pipe run
• Stepping a pipe to clear a slab edge or footing
• Aligning pipe with a tank inlet or outlet
• Fine adjustments in above and below ground drainage

What You Need to Complete the Job

Dry-fit the elbow into the run to confirm the angle, then solvent weld the joints. Use it with the 90mm stormwater pipe and cement with Bostik Pipe Cement Type N. Where a run needs both a gentle and a sharp turn, combine the 15 degree with the other elbows in the range. More fittings are in the PVC Fittings range.

Frequently Asked Questions

When would I use a 15 degree elbow?

When the pipe only needs a small change of direction, such as stepping over a slab edge, lining up with an outlet, or following a slight fall in the trench. A 15 degree elbow gives that small adjustment without the flow restriction of a sharper bend.

Can I combine elbows to make a larger angle?

Yes. Two 15 degree elbows give a 30 degree change, and you can combine them with 22.5 and 45 degree elbows to match almost any angle in a pipe run. Dry-fit the combination first to confirm the total angle lines up with the outlet.

Is this a 90mm fitting?

Yes. This is a 90mm stormwater elbow for 90mm pipe, matching the product title and the rest of the Storm PVC range. All joints are solvent welded to 90mm stormwater pipe and fittings.

Is it suitable for underground pipe runs?

Yes. The recycled PVC fitting is made for above and below ground stormwater work, and the solvent weld joint gives a permanent watertight connection. Bed the pipe evenly in the trench so the joints are not carrying the backfill load.