Sutton D614 12mm x 210mm SDS Masonry Drill Bit

The Sutton D614 is a 12mm two cutter SDS masonry drill bit with a 210mm working length, the deep version of the standard 12mm anchor size. Sutton rates it as professional quality and states it drills 30% faster than conventional SDS drills. The 12mm size drills the hole for heavy dynabolts and anchors, and the 210mm working length gives the depth for structural fixings in concrete and brick. The long flute clears the full depth of the hole, so the bit keeps cutting without binding on deep fixings.

Key Features

• Professional quality, 30% faster than conventional SDS drills
• Patented destructor carbide tip with an aggressive Z shape self centering point
• Wavy cutting edges for superior destruction capacity
• Sand blasted finish, an environmentally friendly production method with zero heavy metals
• Combination spiral flute for controlled dust removal

Specifications

• Diameter: 12mm
• Working length: 210mm
• Series: D614
• Shank: SDS
• Cutters: 2
• Materials: concrete, brick, aerated concrete, stone and granite

Applications

• Deep anchor holes for heavy dynabolts and anchors
• Fixing structural brackets and posts to concrete
• Drilling through thick walls and piers
• Drilling aerated concrete and stone

What You Need To Complete The Job

A 12mm deep hole wants a powerful SDS hammer drill; see the Power Tools range. Wear safety glasses for the dust and leather rigger gloves for the steel. The wider fixing range is under General Hand Tools.

Frequently Asked Questions

What anchors suit a 12mm masonry hole?

A 12mm hole suits medium to heavy masonry anchors and dynabolts that specify a 12mm drill. Match the anchor to the hole size from the manufacturers table, and the 210mm working length gives you the depth those fixings need.

What is a 12mm masonry drill used for?

A 12mm SDS masonry bit drills the hole for heavy dynabolts and anchors in concrete and brick. With the 210mm working length it is also the tool for deep embedment and through fixings in thick sections.

What is the working length on a D614?

The D614 series has a 210mm working length. That is deeper than the D613 series and covers deep anchor settings, through walls and thick concrete sections.

Does the long working length make drilling harder?

No, but it needs a drill with enough impact energy to drive a 12mm bit. The flute clears dust over the full depth, so the bit keeps cutting without binding.

Can I use this bit in brick and block?

Yes, brick and block drill faster than concrete and put less load on the bit. The same carbide tip and flute design work across concrete, brick, aerated concrete, stone and granite.