Sutton D613 11mm x 160mm SDS Masonry Drill Bit

The Sutton D613 is an 11mm two cutter SDS masonry drill bit with a 160mm working length. Sutton rates it as professional quality and states it drills 30% faster than conventional SDS drills, and it is built for concrete, brick, aerated concrete, stone and granite. The 11mm size is a common step for larger dynabolts and masonry anchors where a 10mm hole is not enough.

Key Features

• Professional quality, 30% faster than conventional SDS drills
• Patented destructor carbide tip with an aggressive Z shape self centering point
• Wavy cutting edges for superior destruction capacity
• Sand blasted finish, an environmentally friendly production method with zero heavy metals
• Combination spiral flute for controlled dust removal

Specifications

• Diameter: 11mm
• Working length: 160mm
• Series: D613
• Shank: SDS
• Cutters: 2
• Materials: concrete, brick, aerated concrete, stone and granite

Applications

• Drilling anchor holes for larger dynabolts
• Fixing heavy brackets into concrete and brick
• Drilling aerated concrete and stone
• General masonry work on site

What You Need To Complete The Job

Pair this bit with an SDS hammer drill from the Power Tools range. For the steel fixings that go into these holes, keep an hacksaw and leather rigger gloves close by. The wider fixing range is under General Hand Tools.

Frequently Asked Questions

How do I choose the right masonry drill size?

Match the drill bit to the fixing. Wall plugs and anchors specify a recommended drill diameter, so check the pack and drill the hole it calls for. The D613 range covers 5mm to 12mm, which covers most common wall plugs and light to medium anchors.

What size anchor does an 11mm masonry bit suit?

An 11mm masonry bit drills the hole for larger masonry anchors and dynabolts, generally in the range above 10mm. Match the bit to the anchor manufacturers recommended hole size for the fixing you are using.

How does the dust extraction work?

The combination spiral flute uses a half round spiral to pull dust away from the tip quickly, and a square spiral with a compression channel and depression chamber for controlled removal. That keeps the hole clear and the bit cutting at full speed.

Is the sand blasted finish important?

The sand blasted finish is Sutton stated as an environmentally friendly production method with zero heavy metals. It also leaves a clean surface that does not bind in the hole as the bit works.

Will this bit drill rebar in concrete?

No masonry bit is made to cut steel rebar. If you hit steel, the bit will stop cutting or dull quickly. For concrete with rebar, drill in a different spot or use a specialist bit for steel.