Sutton Supabit Phillips PH2 Screwdriver Bits 50mm

The Sutton Supabit S150 is a 50mm Phillips PH2 screwdriver bit from the Supabit Extreme Impact range, supplied as a 2 pack. It is the everyday Phillips bit for impact drivers, with a torsion neck design that copes with high torque applications and a Phillips profile that absorbs torque peaks to reduce slippage and breakage. The 50mm length suits general screw driving across most trade and DIY work.

Key Features

• Phillips PH2 drive, the most widely used drive system in the world
• Torsion neck design specifically suited to withstand high torque applications
• Design absorbs torque peaks to reduce slippage and breakage
• Elastic property of the bit delivers professional performance under rigorous use
• 2 pack for a spare on hand when the first bit wears
• Supabit Extreme Impact certified for impact drivers

Specifications

• Model: S150
• Drive type: Phillips PH2
• Length: 50mm
• Pack: 2 pieces
• Range: Supabit Extreme Impact Bits
• Compatibility: impact drivers and power screwdrivers

Applications

• Driving Phillips screws in timber, plasterboard and sheet material
• Impact driver screw driving in framing and joinery
• General trade and DIY screw driving
• Cabinet work, decking and repairs

What You Need To Complete The Job

Pair this bit with a Quickbit extension bar for recessed screws and keep a 5 pack of PH2 bits in the kit for high volume work. Browse the full General Hand Tools range for more bits and driving accessories.

Frequently Asked Questions

Why do I get two bits in the pack?

A 2 pack gives you a working bit plus a spare, which is handy on the job because Phillips bits wear and lose their grip over time, especially in hard timber and high torque driving. You can also keep one in each driver if you run more than one drill on site.

What is the difference between a Phillips and a Pozidriv bit?

Phillips and Pozidriv look similar but the recess shapes differ. A Phillips driver has a simple cross slot, while a Pozidriv has extra radial lines between the arms. Do not force a Phillips bit into a Pozidriv screw or the bit can slip and damage the head. Use the matching drive for each fastener.

Will these bits fit a standard drill chuck?

Yes. The 1/4 inch hex shank fits the standard quick-change chuck on drill drivers and impact drivers, and it also fits hex holders and extension bars. That makes the bit usable across the common power tools on a job site.

Are the two bits in this pack the same size?

Yes. Both bits are Phillips PH2 in a 50mm length, so the pack gives you two identical working bits. That is useful because Phillips bits wear and lose their grip over time in hard driving. You can keep one in the driver and one as a spare, or run one in each drill if you carry more than one on site.