Aluminium Sunglaze End Closure

The Aluminium Sunglaze End Closure is a small but important part of the Sunglaze standing seam system. It fits over the end of the joiner assembly and stops the polycarbonate sheets from sliding out of their tracks, which is exactly what keeps a long run of panels aligned and watertight. Without it, an open joiner end is a place where a sheet can creep with thermal movement and where debris can collect.

The end closure is machined aluminium, chosen to match the other Sunglaze joiners rather than stand out. It closes the exposed end of the aluminium cap and base assembly in a clean line, so the finished edge of the roof looks deliberate instead of cut off. Because it is aluminium, it will not rust or rot and it keeps its finish in exposed positions.

It is a small part with a specific job, and the sort of item you want to order at the same time as the joiners rather than discovering it is missing halfway through an install. One end closure is needed at each open end of a joiner run.

Key Features

• Aluminium construction that matches the Sunglaze joiner range
• Stops sheets sliding out of the joiner track
• Closes off the joiner assembly for a clean finished edge
• Rust and rot resistant for exposed outdoor use
• Simple to fit at the end of a joiner run

Specifications

Applications

• End of a joiner run on a Sunglaze veranda or pergola
• Sealing the open end of cap and base assemblies
• Wherever a sheet run needs a positive stop

What You Need To Complete The Job

The end closure works with the other Sunglaze joiners. It sits over the Aluminium Sunglaze Base and Aluminium Sunglaze Cap assembly and is held in place with the same Sunglaze SD hex screws used across the system. All parts are listed in the Sunglaze category.

Frequently Asked Questions

Where is the end closure used?

It is fitted at the open end of a joiner assembly, where the aluminium cap and base run stops. It closes that exposed end so the polycarbonate sheets cannot slide out of their track and so debris cannot collect inside the profile.

How many end closures do I need?

One is needed at each open end of a joiner run. Count the number of joiner assemblies that finish without turning into another joint, and order that many. Most pergolas and verandas need a handful.

Is it compatible with all Sunglaze sheets?

Yes. The end closure is part of the standard Sunglaze joiner system, so it works with the clear, grey, solar control and bluish breeze panels. It is designed for the same cap and base profiles used across the range.

Is it aluminium or plastic?

It is aluminium. That matches the rest of the Sunglaze joiners, gives a durable finish in exposed positions, and avoids the brittle failure you can get from plastic alternatives over years of thermal movement.

Can I buy it with the other joiners?

Yes. Order the base, cap and cover joiners and the end closure together so the whole system arrives in one delivery. The matching parts are all in the Sunglaze category.