Overview

The 90mm Saddle Clip is a pipe fixing that holds a 90mm stormwater or drainage pipe securely to a wall, post, timber frame or fence. It is a simple two-part clip that sits around the pipe and is screwed to the mounting surface, giving the pipe a firm, level fixing that keeps the run straight.

It is made from galvanised steel with a powder-coated finish, which gives it corrosion resistance for outdoor use. The saddle design spreads the load around the pipe and makes installation quick with standard screws or fasteners.

Key Features

• Secures 90mm stormwater PVC pipe to a mounting surface
• Galvanised steel with a powder-coated finish
• Corrosion resistant for outdoor use
• Quick to fit with standard screws or fasteners
• Saddle design holds the pipe firmly and evenly
• Suits brickwork, timber framing, fences and posts

Specifications

• Fits: 90mm nominal PVC pipe
• Material: galvanised steel, powder-coated
• Mounting: screw or fastener to the substrate
• Use: stormwater and drainage pipe fixing

Applications

• Fixing 90mm stormwater downpipes to a wall
• Securing drainage pipe to timber framing
• Mounting pipe to fences and posts
• Roof plumbing and wastewater pipe runs

What You Need to Complete the Job

Position the clip around the pipe at the fixing point, mark the screw holes, then drive the screws into the substrate. Space the clips evenly along the run so the 90mm stormwater pipe is held level and straight, and keep the joints supported. The clip suits the fittings in the PVC Fittings range. More concreting and plumbing supplies are in the Concreting range.

Frequently Asked Questions

How many clips do I need per pipe length?

For a 6 metre pipe run, space the clips at roughly 1 metre intervals, which gives about 5 to 6 clips per length. Place a clip near each joint and at every change of direction so the pipe is fully supported.

Can I use these clips outdoors?

Yes. The galvanised steel with a powder-coated finish is made for outdoor use and resists corrosion in weather and moisture. It is a standard fixing for stormwater downpipes and exposed drainage pipe.

What do I fix the clip to?

The clip screws to any sound substrate, including brickwork, timber framing, fences and posts. Use the screw or fastener that suits the substrate, such as masonry anchors for brick or timber screws for posts.

Do I need a stand-off version?

A stand-off clip holds the pipe away from the mounting surface, which helps airflow and makes cleaning easier. If the pipe runs against a wall where a gap is wanted, use a stand-off style clip; for a flush fixing, this standard saddle clip is the one.