Sutton Supabit Phillips PH2 Screwdriver Bits 50mm 5 Pack

The Sutton Supabit S151 is a 50mm Phillips PH2 screwdriver bit from the Supabit Extreme Impact range, supplied as a 5 pack for high volume screw driving. The torsion neck design is built to withstand the high torque output of impact drivers, and the Phillips profile absorbs torque peaks to reduce slippage and breakage. A 5 pack keeps a fresh bit in reach when you are driving hundreds of screws.

Key Features

• Phillips PH2 drive, the most widely used drive system in the world
• Torsion neck design specifically suited to withstand high torque applications
• Design absorbs torque peaks to reduce slippage and breakage
• 5 pack for high volume screw driving and spare bits on site
• Supabit Extreme Impact certified for impact drivers

Specifications

• Model: S151
• Drive type: Phillips PH2
• Length: 50mm
• Pack: 5 pieces
• Range: Supabit Extreme Impact Bits
• Compatibility: impact drivers and power screwdrivers

Applications

• High volume Phillips screw driving on site
• Framing, decking, formwork and general construction
• Trade and DIY screw driving tasks
• Keeping spare bits in the drill bag for a full day of work

What You Need To Complete The Job

Load the 5 pack into your kit for long screw driving days, and pair the bits with a Quickbit extension bar for deep fasteners. For a spare in different lengths, add the 100mm PH2 2 pack. Browse the full Power Tools range for drivers and accessories.

Frequently Asked Questions

Why buy a 5 pack of the same bit?

Phillips bits are a consumable on high volume jobs. As a bit wears, it starts to slip and can round out screw heads, which costs time and material. A 5 pack means you can swap to a fresh bit as soon as the one in the driver loses its bite, keeping the job moving.

How long will a Supabit bit last?

The Supabit Extreme Impact bits are hardened and built with a torsion neck to resist the shock loads of impact drivers, so they last noticeably longer than a standard bit in the same work. Exact life depends on the material, screw type and driving speed, but the design targets the heavy end of trade use.

Does the 5 pack suit a bit holder belt?

Yes. The 50mm bits have the standard 1/4 inch hex shank, so they fit most drill bit holders, magnetic holders and bit belts. You can keep a few loaded and ready to swap on site without digging through the drill bag.

Why would I buy a 5 pack of bits?

A 5 pack keeps a fresh bit ready for high volume screw driving, because Phillips bits are a consumable that wears and starts to slip after heavy use. When a bit loses its bite it can round out screw heads, which costs time. Having spares means you swap to a new bit the moment the current one starts to slip.