Sutton D613 9mm x 160mm SDS Masonry Drill Bit

The Sutton D613 is a 9mm two cutter SDS masonry drill bit with a 160mm working length. Sutton rates it as professional quality and states it drills 30% faster than conventional SDS drills. The 9mm size is a standard hole for masonry anchors and dynabolts in the mid range, used in concrete, brick, aerated concrete, stone and granite. The 160mm working length clears standard anchor depths and gives the bit a firm reach through render and block.

Key Features

• Professional quality, 30% faster than conventional SDS drills
• Patented destructor carbide tip with an aggressive Z shape self centering point
• Wavy cutting edges for superior destruction capacity
• Sand blasted finish, an environmentally friendly production method with zero heavy metals
• Combination spiral flute for controlled dust removal

Specifications

• Diameter: 9mm
• Working length: 160mm
• Series: D613
• Shank: SDS
• Cutters: 2
• Materials: concrete, brick, aerated concrete, stone and granite

Applications

• Drilling holes for masonry anchors and dynabolts
• Fixing heavy brackets into concrete and brick
• Drilling aerated concrete and stone
• General building and fixing work

What You Need To Complete The Job

Use this bit in a capable SDS hammer drill from the Power Tools range. For the steel fixings, keep an hacksaw and a pair of leather rigger gloves close by. The wider fixing range is in General Hand Tools.

Frequently Asked Questions

Does this bit need a pilot hole in masonry?

No. The Z shape self centering destructor tip starts the hole directly on the mark, so you do not need to centre punch or pilot a masonry hole. Start with light pressure and let the point bite, then feed with the hammer action.

What is a 9mm masonry drill used for?

A 9mm SDS masonry bit drills the hole for mid size masonry anchors and dynabolts. It is a common fixing size for brackets, handrails and structural fixings in concrete and brick.

Does the bit suit hard concrete?

Yes. The destructor carbide tip and 30% faster cutting claim are aimed at professional work in hard materials. Use a steady feed and let the hammer action and carbide do the cutting.

How do I match the anchor to the bit?

Check the anchor manufacturer for the recommended drill size. A 9mm bit suits anchors that specify a 9mm hole; matching the bit to the anchor is what gives a firm fixing.

Can this bit be used for drilling through block?

Yes, block and aerated concrete drill quickly with this bit. The 160mm working length lets you drill right through a standard block for through fixings.