Sutton D614 6.5mm x 210mm SDS Masonry Drill Bit

The Sutton D614 is a 6.5mm two cutter SDS masonry drill bit with a 210mm working length. Sutton rates it as professional quality and states it drills 30% faster than conventional SDS drills. The 6.5mm size is a fixing size for wall plugs and anchors, and the 210mm working length gives you the reach to drill through thick walls, piers and assembled masonry.

Key Features

• Professional quality, 30% faster than conventional SDS drills
• Patented destructor carbide tip with an aggressive Z shape self centering point
• Wavy cutting edges for superior destruction capacity
• Sand blasted finish, an environmentally friendly production method with zero heavy metals
• Combination spiral flute for controlled dust removal

Specifications

• Diameter: 6.5mm
• Working length: 210mm
• Series: D614
• Shank: SDS
• Cutters: 2
• Materials: concrete, brick, aerated concrete, stone and granite

Applications

• Deep fixing holes in masonry and block
• Drilling through thick render and walls
• Fixing wall ties and light anchors
• General building and maintenance work

What You Need To Complete The Job

Pair this bit with an SDS hammer drill from the Power Tools range, and keep safety glasses on for the dust. For the fixings, an hacksaw and a pair of leather rigger gloves round out the kit. The full range is under General Hand Tools.

Frequently Asked Questions

What is the difference between the D613 and D614?

The D613 series has a 160mm working length and the D614 series has a 210mm working length. For standard anchor depths the D613 is enough; for deep fixings, through walls and long embedment the D614 has the reach.

What is a 6.5mm masonry bit with a long reach for?

A 6.5mm SDS bit with a 210mm working length drills deep fixing holes for wall plugs and anchors through thick masonry. It is the size to reach for when you need to fix through a wall, not just into it.

How do I keep the hole straight over 210mm?

The self centering point starts the hole true, and the rigid SDS shank holds the line as you feed. Use a steady, light pressure and let the hammer action do the cutting.

Is this bit hard to control in a hammer drill?

No. SDS drill chucks hold the bit firmly, and the hammer action transfers the force down the bit. Start gently on smooth surfaces and build up the feed as the hole establishes.

Will the long flute clog in soft brick?

No. The combination spiral flute is designed to pull dust out continuously, which is exactly what you need in soft brick and block. The dust clears as you drill.