Stainless Steel Quick Connect 3/8 in NPT Male

This quick connect fitting has a 3/8 inch NPT male thread and is made from stainless steel, so it stands up to water, solvents and wash down without rusting. Quick connects let you join and swap hose runs on an airless sprayer in seconds, which keeps setup quick and breakdown fast at the end of the day.

Key Features

• Stainless steel construction resists corrosion
• 3/8 inch NPT male thread
• Quick connect action for fast hose changes
• Rated for high pressure airless spray work
• Suits paint machine hose and pump lines

Specifications

• Type: quick connect fitting
• Thread: 3/8 inch NPT male
• Material: stainless steel
• Part number: 12585.300.105S
• Brand: Spray Chief

Applications

• Joining airless hose sections to a pump or gun
• Swapping between hose lengths on the same machine
• Wet areas and wash down environments
• Replacing worn mild steel fittings

What You Need To Complete The Job

Use the quick connect with the airless hose range and the matching plug fittings in the Paint Machine and Accessories range.

Frequently Asked Questions

Why use stainless steel for a quick connect?

Stainless steel will not rust when it is exposed to water, thinners and wash down spray, which mild steel fittings can. On a sprayer that gets cleaned after every job, that longer life makes the stainless fitting worth the small extra cost.

What does NPT mean?

NPT stands for National Pipe Thread, the standard taper thread used on pipe fittings in Australia and the US. The 3/8 inch size is a common thread for airless spray hose connections, and it seals as the threads tighten.

Can I use this to extend my hose?

Yes. Add the quick connect to the end of a hose run and you can join a second hose length for a long wall or a high roof. Use a hose joiner of the same rating so the connection holds full spray pressure.

What is the difference between the socket and the plug?

A quick connect set has two halves: the socket, which has the collar you pull back, and the plug, which pushes in and locks. This listing is the socket with a 3/8 inch NPT male thread, so it pairs with the matching plug on the hose or gun end.

Can I use this on a paint hose line?

Yes. Quick connects are used on airless spray lines to join hose sections and swap guns quickly. Check that the hose fitting is the matching 3/8 inch NPT size and rated for the pressure of your pump before use.

Why choose stainless steel over brass?

Stainless resists rust and corrosion from water, thinners and wash down, which a mild steel fitting will not. On a sprayer that gets flushed after every job, the stainless body lasts longer and keeps a clean sealing surface.