Proctor Eaves Comb Filler EC62

The Proctor eaves comb filler EC62 is a 1000mm strip of flexible fingers that fills the gap left between profiled roof cladding and the fascia or eave line. Profiled tiles and corrugated steel leave open channels at the edge of the roof, and those channels are exactly where birds and large insects get in. The comb fills the opening while still letting air pass, so the roof space stays ventilated without the pest problem.

Key Features

• 1000mm length covers the full run between batten centres
• Flexible fingers conform to the profile of tiles and steel cladding
• Blocks birds and large insects without blocking airflow
• Replaces expensive purpose-made profiled fillers
• Suits residential, commercial, metal and tiled roofs
• Quick to fit along the eave line before the cladding goes on

Specifications

• Product: Proctor eaves comb filler EC62
• Length: 1000mm
• Application: eave gap filling under profiled cladding
• Compatibility: profiled roof tiles and steel roof cladding
• Installation: fits along the eave between cladding and fascia

Installation

Lay the comb along the eave line so the fingers sit into the troughs of the tiles or cladding profile. The fingers bend to match the shape of the profile, which closes the gaps without a custom-cut filler. Trim the length with snips where the run ends at a corner or a vent position, and continue the airflow pathway above the sarking.

Applications

• Eave lines on tiled and metal roofs
• Filling gaps around valley and hip edges
• Keeping birds and insects out of the roof space
• Finishing a calculated passive ventilation system

What You Need To Complete The Job

Pair the eaves comb with the rest of the ProctorVent system so the roof space gets a continuous airflow path. Add a Proctor over fascia vent for the eave inlet and a roll panel vent where the insulation sits against the cladding. See the full Roof Ventilation range for the complete kit.

Frequently Asked Questions

What is an eaves comb filler for?

It fills the gaps between profiled roof cladding and the fascia at the eave line. Those gaps are open entry points for birds and large insects, and the comb closes them while keeping the airflow path open for roof space ventilation.

Does it block ventilation?

No. The fingers sit into the profile troughs and leave the space above the sarking clear, so air still moves into the roof space. The point of the product is to keep pests out without choking the vent system.

What lengths does it come in?

This is the 1000mm length, which matches the standard spacing between roof battens. Trim the ends with snips to fit shorter runs or around vent positions.

Does it suit both tile and metal roofs?

Yes. The flexible fingers adjust to profiled concrete and terracotta tiles as well as corrugated and trapezoidal steel cladding. That is why it replaces profile-specific fillers.

Can I order for delivery or pickup?

Yes. You can order online and choose Australia-wide delivery or pickup from our Truganina trade counter in Melbourne’s west. Delivery windows depend on your postcode, and we send a confirmation once your order is ready. For any questions call (03) 93941400 or email orders@singhroofingsupplies.com.au.