Sutton D614 10mm x 210mm SDS Masonry Drill Bit

The Sutton D614 is a 10mm two cutter SDS masonry drill bit with a 210mm working length, the long version of a very common anchor size. Sutton rates it as professional quality and states it drills 30% faster than conventional SDS drills. The 10mm size suits mid range dynabolts and anchors, and the 210mm working length reaches through thick walls and gives the depth for heavier structural fixings.

Key Features

• Professional quality, 30% faster than conventional SDS drills
• Patented destructor carbide tip with an aggressive Z shape self centering point
• Wavy cutting edges for superior destruction capacity
• Sand blasted finish, an environmentally friendly production method with zero heavy metals
• Combination spiral flute for controlled dust removal

Specifications

• Diameter: 10mm
• Working length: 210mm
• Series: D614
• Shank: SDS
• Cutters: 2
• Materials: concrete, brick, aerated concrete, stone and granite

Applications

• Deep anchor holes for mid range dynabolts
• Fixing heavy brackets and posts to concrete
• Drilling through thick walls for through fixings
• Drilling aerated concrete and stone

What You Need To Complete The Job

Pair this bit with a capable SDS hammer drill from the Power Tools range, and keep safety glasses on for the dust. For the steel fixings, an hacksaw and a set of leather rigger gloves round out the kit. The full range is under General Hand Tools.

Frequently Asked Questions

How fast does this bit drill concrete?

Sutton rates the D614 as 30% faster than conventional SDS drills. In practice the destructor tip and flute design keep the bit cutting quickly with less pressure, so the work is noticeably quicker than with a standard bit.

What is a 10mm masonry drill with a long reach for?

A 10mm SDS bit with a 210mm working length drills deep anchor holes for mid range dynabolts and through fixings in thick walls. The extra reach is for jobs where a standard 160mm bit comes up short.

Will the 210mm length give a straight hole?

Yes. The rigid SDS shank and the self centering destructor tip keep the bit on line, and the flute clears dust so the bit does not wander in a packed hole. Use a steady feed.

Can I use this for masonry anchors in a slab?

Yes. The 210mm working length lets you set deeper anchors in slabs and footings, which is what heavier fixings need for full holding strength.

Is the sand blasted finish just cosmetic?

No. Sutton states the sand blasted finish is an environmentally friendly production method with zero heavy metals. It also leaves a clean, non binding surface on the bit.