Sutton D613 7mm x 160mm SDS Masonry Drill Bit

The Sutton D613 is a 7mm two cutter SDS masonry drill bit with a 160mm working length. Sutton rates it as professional quality and states it drills 30% faster than conventional SDS drills. The 7mm size is a common step up from the 6mm anchor size, used for 7mm dynabolts and fixings in concrete, brick, aerated concrete, stone and granite. It is a solid middle size between the common 6mm and 8mm anchor holes.

Key Features

• Professional quality, 30% faster than conventional SDS drills
• Patented destructor carbide tip with an aggressive Z shape self centering point
• Wavy cutting edges for superior destruction capacity
• Sand blasted finish, an environmentally friendly production method with zero heavy metals
• Combination spiral flute for controlled dust removal

Specifications

• Diameter: 7mm
• Working length: 160mm
• Series: D613
• Shank: SDS
• Cutters: 2
• Materials: concrete, brick, aerated concrete, stone and granite

Applications

• Drilling holes for 7mm dynabolts and anchors
• Fixing brackets and fixtures to masonry
• Drilling aerated concrete and stone
• General building and maintenance work

What You Need To Complete The Job

Match this bit to an SDS hammer drill from the Power Tools range. Keep safety glasses on for masonry dust, and have leather rigger gloves for handling the fixings. More gear is under General Hand Tools.

Frequently Asked Questions

What does 2 cutter mean?

Two cutter refers to the number of cutting edges on the carbide tip. A 2 cutter masonry bit is the standard all round design for hammer drilling in concrete and brick, balancing cutting speed with control. It suits the D613 series and most general masonry work.

What is a 7mm masonry drill used for?

A 7mm SDS masonry bit drills the hole for 7mm dynabolts and small anchors in concrete and brick. It sits between the 6mm and 8mm anchor sizes and is common in fit out and fixing work.

How fast will this bit drill concrete?

Sutton rates the D613 as 30% faster than conventional SDS drills, thanks to the destructor tip and flute design. Actual speed depends on the drill and the concrete, but the bit is built to cut quickly.

Will the bit work on brick and block?

Yes, brick and block drill faster than concrete and put less load on the bit. The same carbide tip and flute work across concrete, brick, aerated concrete, stone and granite.

Does the yellow coating mean anything?

The yellow is the finish on this D613 series bit. The sand blasted finish is the stated production method and the yellow is the identifying colour of the series; it does not change the cutting performance.