Sutton D613 10mm x 160mm SDS Masonry Drill Bit

The Sutton D613 is a 10mm two cutter SDS masonry drill bit with a 160mm working length, the long series entry in the D613 family. Sutton rates it as professional quality and states it drills 30% faster than conventional SDS drills. It is built for concrete, brick, aerated concrete, stone and granite, which covers anchor and fixing holes across most building work, including roof anchoring and brick and blockwork.

Key Features

• Professional quality, 30% faster than conventional SDS drills
• Patented destructor carbide tip with an aggressive Z shape self centering point
• Wavy cutting edges for superior destruction capacity
• Sand blasted finish, an environmentally friendly production method with zero heavy metals
• Combination spiral flute for controlled dust removal

Specifications

• Diameter: 10mm
• Working length: 160mm
• Series: D613
• Shank: SDS
• Cutters: 2
• Materials: concrete, brick, aerated concrete, stone and granite

Applications

• Drilling anchor and dynabolt holes in concrete
• Fixing into brick and block work
• Drilling aerated concrete and stone
• General masonry work on site

What You Need To Complete The Job

You need an SDS hammer drill to drive this bit; see the Power Tools range for a suitable machine. For steel work alongside the masonry, an hacksaw and a set of leather rigger gloves round out the kit. The full fixing range is under General Hand Tools.

Frequently Asked Questions

What is the D613 series?

The D613 is the 160mm working length SDS masonry drill series from Sutton. The range spans 5mm to 12mm diameters for wall plugs, dynabolts and anchors in concrete, brick and block, and the length covers standard fixing depths.

What is an SDS masonry drill bit used for?

An SDS masonry drill bit drills holes in concrete, brick, block, stone and similar materials. The SDS shank locks into an SDS hammer drill, and the hammer action combined with the carbide tip breaks up the material as the flutes pull the dust out of the hole.

What is the working length on a D613?

The D613 series has a 160mm working length, which is the length of the fluted section that does the drilling. Overall length is longer once the SDS shank is added. This 10mm bit suits standard anchor and dynabolt fixing depths.

Does the destructor tip make a difference?

Yes. The patented destructor carbide tip uses a Z shape self centering point with wavy cutting edges, which Sutton says gives superior destruction capacity and helps the bit drill 30% faster than a conventional SDS drill.

Can I use this bit in a normal drill?

No. The SDS shank needs an SDS hammer drill. It will not fit a standard chuck, and without hammer action a masonry bit will not cut concrete. Use an SDS machine as intended.