Nutech NuFlex Roof Coating 15 L – Durable Acrylic Membrane for Roof & Masonry Surfaces
Nutech NuFlex 15 L is a premium, water-based acrylic emulsion designed to protect and rejuvenate a variety of roofing and masonry surfaces. Engineered with fine particle size technology and enhanced wet adhesion properties, NuFlex delivers a durable, flexible, and weather-resistant finish suitable for Australia’s demanding climate.
Key Features
- Advanced Acrylic Formula: Formulated with 100% acrylic resin for maximum durability and performance under adverse weather conditions.
- Waterproof Protection: Provides a waterproof, non-colour fading protective coating, ensuring longevity of the surface.
- UV Resistance: Offers excellent resistance to ultraviolet light, preventing yellowing and degradation over time.
- Mould & Fungus Resistance: High resistance to mould, fungus, and lichen, maintaining the aesthetic appeal of the surface.
- Versatile Application: Suitable for cement and roof tiles, as well as all masonry surfaces.
- Colour Retention: Maintains gloss and colour integrity, ensuring a vibrant finish for years.
- Warranty: Backed by an 8-year manufacturer’s warranty when applied according to specifications.
Technical Specifications
Attribute | Details |
Product Type | Water-based acrylic emulsion |
Finish | Gloss |
Coverage | Approximately 4 m² per litre per coat |
Drying Time | Touch dry in 1 hour; recoat after 4 hours |
Full Cure | 7 days |
VOC Content | Less than 3% |
Application Temperature | Between 10°C and 30°C |
Shelf Life | 12 months in unopened container |
Available Colours
NuFlex is available in a wide range of standard colours, including but not limited to:
- Charcoal
- Surfmist
- Terracotta
- Monument
- Basalt
- Woodland Grey
- Paperbark
- Jasper
- Ironstone
- Manor Red
Custom tinting is also available to match specific colour requirements.
Application Guidelines
- Surface Preparation: Ensure the surface is clean, dry, and free from contaminants. Repair any cracks or defects.
- Priming: Apply a suitable Nutech primer compatible with the substrate.
- Application: Apply two coats of NuFlex using a brush, roller, or spray equipment. Allow a minimum of 4 hours between coats.
- Curing: Full curing is achieved after 7 days under normal conditions.
Note: Do not apply if rain is expected within 24 hours. Avoid application in temperatures below 10°C or above 30°C.
For a durable, aesthetically pleasing, and long-lasting roof and masonry finish, choose Nutech NuFlex Roof Coating 15 L. Its advanced formulation ensures your surfaces are protected against the elements while maintaining their visual appeal.