Ogee Gutter
- Home
- //
- Ogee Gutter
Filter by category
Ogee gutters in Colorbond or Zincalume steel, in the 125 mm OG profile with a curved front that suits period homes and newer builds alike. Order the gutter cut to length, then add the matching OG stop ends, 90 degree cast angles and external brackets. Collect from our Truganina store or order delivery.
Building an ogee gutter run
The ogee gutter we stock is 125 mm wide and 100 mm deep, with the S-curve front the ogee name comes from. It comes in Colorbond colours or plain Zincalume and is cut to the length of your run, which means less trimming and fewer joins on site. It is priced by the metre, so you pay for the length you need. Colorbond gives you a baked-on paint finish to match the house, while Zincalume is an unpainted metallic coating.
Each run needs fittings made for the OG shape. OG gutter stop ends close each end of the run and come in left and right hand. A 125 mm cast angle turns the gutter through 90 degrees on internal or external corners and comes as a two-piece set. OG external brackets fix the gutter to the fascia from the outside, in galvanised or pre-painted steel.
If you are replacing an existing ogee line, measure each run, count the corners and ends, and order the gutter and the fittings together so everything matches on the day. If the old gutter is a different width, measure it before you order, because the fittings here are made for the 125 mm profile.
The gutter is one part of the roof edge. Downpipes carry the water down from the outlets, and steel fascia gives the brackets a straight edge to fix to. The Colorbond colour chart helps you match gutter, fascia and roof.
For a squarer look, quad and squareline profiles are in guttering, and the brackets and stop ends for them are in guttering accessories.
Ogee gutter FAQs
What is an ogee gutter?
An ogee gutter has an S-shaped front, named after the ogee curve used in architectural mouldings. On fittings the name is often shortened to OG, so OG gutter and ogee gutter mean the same profile.
What size is your ogee gutter?
It is 125 mm wide and 100 mm high, in Colorbond steel or Zincalume. The stop ends, cast angles and brackets in this category are sized for that 125 mm profile.
What fittings do I need for an ogee gutter?
A stop end at each open end of the run, a cast angle at every corner, and external brackets along the length to fix it to the fascia. Order them with the gutter so the colours match.
Can I order ogee gutter cut to length?
Yes. Enter the length of your run when you order and the gutter is cut to suit, so you are not joining or trimming full lengths on site.