Airless Reversible Tip Guard Base Assembly, G Thread

This is the tip guard base assembly that holds a reversible spray tip on an airless gun. It is available in two threads: the 7/8 inch G thread to suit Titan, Graco, Wagner and SC600 type fittings, and the 11/16 inch F thread for the Wagner and SC500 type guns. The guard protects the tip from knocks and keeps the spray fan pointed where you aim it.

Key Features

• G thread 7/8 inch for Titan, Graco, Wagner and SC600 fittings
• F thread 11/16 inch for Wagner and SC500 fittings
• Holds a reversible spray tip securely on the gun
• Protects the tip from damage on site
• Base assembly for the Spray Chief tip system

Specifications

• Type: reversible tip guard base assembly
• Thread options: G thread 7/8 inch, F thread 11/16 inch
• Brand: Spray Chief

Applications

• Fitting a reversible tip to a Graco, Wagner or Titan gun
• Replacing a worn or lost tip guard
• Converting a gun between tip sizes
• Protecting the tip during transport and setup

What You Need To Complete The Job

Pair the guard with a reversible spray tip on your SC600 spray gun, and keep the gun filter fresh. The rest of the tip and filter range is in the Paint Machine and Accessories category.

Frequently Asked Questions

What is the difference between G thread and F thread?

G thread is the 7/8 inch standard used on most modern airless guns, including the Titan, Graco, Wagner and SC600 models. F thread is the older 11/16 inch standard used on the Wagner and SC500 range. Choose the version that matches your gun.

Does this guard work with reversible tips?

Yes. This is the base assembly designed for the reversible tip system, so you can turn the tip to clear a blockage and flip it back without stopping the job. Just fit the reversible tip into the guard and hand tighten.

Can I swap the guard between guns?

If your guns share the same thread, yes. The guard is a self contained assembly that screws onto the gun body, so you can move it between guns that use the same G or F thread fitting.

How do I fit a reversible tip into the guard?

Push the tip into the guard base until it seats, then hand tighten the guard onto the gun. To clear a blockage, loosen the guard, turn the tip 180 degrees, tighten and trigger once to blow the blockage out.

Which thread version do I need?

Measure the thread on your gun. The G thread is the 7/8 inch standard on Titan, Graco, Wagner and SC600 guns, and the F thread is the 11/16 inch standard on the Wagner and SC500 range.