Airless Extension Swivel Adapter 7/8 x 7/8 G Thread

This swivel adapter, model SWGSR, connects an airless spray gun to a gun extension and gives accurate spraying at any height or angle. It has a 7/8 inch G thread and screws onto Graco, Wagner and other popular make extensions. The swivel turns to 90 degrees, so it reaches challenging areas like eaves and under surfaces without you moving the ladder.

Key Features

• Swivels to 90 degrees for hard to reach areas
• 7/8 inch G thread fits most spray extensions
• Screws onto Graco, Wagner and other popular make extensions
• Accurate spraying at any height or angle
• Adds reach so the operator stays cleaner and further from the spray

Specifications

• Model: SWGSR
• Thread: 7/8 inch G thread
• Swivel: 90 degrees
• Fit: spray gun to spray extension
• Brand: Spray Chief

Applications

• Connecting a spray gun to an extension pole
• Spraying eaves, ceilings and under surfaces
• Reaching high walls from the ground
• Adding reach to a roof or fascia job

What You Need To Complete The Job

Screw the adapter onto a gun extension pole and connect your SC600 spray gun, then run the pump through a 30 metre airless hose. More poles and swivels are in the Paint Machine and Accessories range.

Frequently Asked Questions

What is the 7/8 x 7/8 in the name?

The 7/8 x 7/8 refers to the thread size on both ends of the adapter. Both sides use the 7/8 inch G thread, so the adapter sits between a gun and an extension that share the same thread standard.

Will the swivel hold its angle while I spray?

Yes. The swivel joint is a controlled fitting that holds the angle you set it to, so the fan stays square to the surface while you move the pole. You set the angle for the section and adjust it as you move on.

Does it fit my extension pole?

It fits extensions with the 7/8 inch G thread, which is the common standard across the Graco, Wagner and Spray Chief ranges. If your pole is an older F thread model, you will need the matching adapter.

How do I attach the swivel?

Screw the swivel onto the end of the extension, then screw the gun onto the other side. Both ends use the 7/8 inch G thread, so the fitting seats with a firm hand tighten and no adapter on a G thread gun.

Will the swivel hold its position while I spray?

Yes. The swivel joint is a controlled fitting that holds the angle you set, so the fan stays square to the surface while you move the pole. Adjust it as you move along the job.