Sutton H513 Sheet Metal Recipro Blades 300mm

The Sutton H513 is a Dominator recipro blade for sheet metal, sold here as a 2 pack in the 300mm length. It is a high performance blade with an extra tall and thin body for fast, accurate and straight plunge cuts in metal, suited to cutting steel, stainless steel and metal pipe over 1.5mm. The 300mm length gives the reach for deeper cuts and pipe work. The 25mm tall body reduces twisting for straighter cuts, and the thin kerf keeps the blade flexible and fast. Made from cobalt bi-metal HSS, it lasts up to 10 times longer than a high carbon steel blade. Made in Germany.

Key Features

• Extra tall 25mm body reduces twisting for straighter, more accurate cuts
• Thin kerf for flexibility and speed
• Increased tang angle for optimal speed and cutting performance
• Cobalt bi-metal HSS for flexibility, heat and break resistance
• Lasts up to 10 times longer than high carbon steel blades
• Made in Germany

Specifications

• Model: H513 Dominator
• Length: 300mm
• Body: 25mm x 0.9mm
• Teeth: 18TPI
• Material: cobalt bi-metal HSS
• Pack: 2 blades
• Application: sheet metal straight cut over 1.5mm

Applications

• Straight plunge cuts in sheet metal over 1.5mm
• Cutting steel and stainless steel
• Cutting metal pipe and duct
• Fabrication and demolition metal work

What You Need To Complete The Job

Run these blades in a reciprocating saw from the Power Tools range, and keep leather rigger gloves on for sharp metal edges. For a broader metal cutting selection, the H589 metal set is the match. More cutting gear is under Carpentry Tools.

Frequently Asked Questions

Why choose the 300mm length for sheet metal?

The 300mm blade gives the reach for deeper cuts and for cutting pipe and duct from the outside, where a shorter blade cannot span the work. It is the length to grab when you need to cut deep into a metal section.

How does the tall body stop the cut drifting?

The 25mm tall body resists twisting, so the blade holds its line through the cut instead of bending sideways under load. That is what keeps the cut straight and accurate in sheet metal, which is the point of the Dominator range.

Can I use the 300mm blade for pipe work?

Yes. The listing covers steel, stainless steel and metal pipe, and the long reach makes it easier to cut through pipe and duct in one pass. The 18TPI teeth suit the medium wall material.

How do I keep the cut clean on thin sheet?

Use a sharp blade and a steady feed, keep the saw square to the work, and let the blade do the cutting. A thin kerf blade like this one removes less material, which gives a cleaner cut edge and less burr on thin sheet.