OX Trade Ratchet Tie Downs 25mm 4 Pack

The OX Trade ratchet tie downs are heavy duty straps for securing loads on trailers, utes and roof racks. Each strap uses 25mm wide blue polyester webbing at 4m long, with vinyl coated S hooks for protected hook up. The ratchet action pulls the strap tight and holds the load firm during transport. This is a 4 pack, so you have enough straps for a typical load.

Key Features

• Heavy duty ratchet tie down straps
• 25mm x 4m blue polyester webbing
• Vinyl coated S hooks for added protection
• Ratchet action for a firm, secure tension
• 4 pack for a typical load

Specifications

• Webbing: 25mm x 4m blue polyester
• Hooks: vinyl coated S hooks
• Pack: 4 straps
• Lashing capacity: 250kg, breaking strength 500kg (supplier-verified OX-T201504, AS/NZS 4380.2001)

Applications

• Securing loads on trailers and utes
• Tie down on roof racks and ladders
• Holding building materials during transport
• General load restraint on site and on the road

What You Need To Complete The Job

Use these straps to secure your load, and keep a set of leather rigger gloves on hand when tensioning and releasing the ratchets. Wear clear safety glasses if you are cutting or handling strapping. See the Safety Equipment range for more site gear.

Frequently Asked Questions

How do ratchet tie downs work?

A ratchet tie down uses a ratchet mechanism on the strap to pull the webbing tight and hold the tension. Feed the strap through the ratchet, lift the handle to take up the slack, then pump the handle to tighten the strap against the load. The ratchet locks the tension so the load stays secure.

What is the lashing capacity?

The straps are rated to a 250kg lashing capacity and a 500kg breaking strength (supplier-verified OX-T201504, AS/NZS 4380.2001). The 250KGLC in the product name matches this rating. Always work within the rated capacity of the strap and check the label before each use.

Are the hooks protected?

Yes. The straps use vinyl coated S hooks, which protect the hook and the load from scratching during hook up. The coating also helps the hook grip the anchor point without marring the surface. It is a small detail that keeps the load and the strap in better condition.

Can I use these on a roof rack?

Yes. The straps are a practical choice for securing loads on roof racks, trailers and utes, including ladders and building materials. Use the right number of straps for the size of the load, position them to stop movement in all directions, and check the tension before driving.