Overview

The OX Pro Telescopic Bullfloat Handle extends from 1300mm to 2400mm, giving you standing reach for the bullfloat pass on concrete slabs. It is made from high quality extruded aluminium with a fluted profile that stays stiff over the extended length, and a powdercoated finish that shrugs off site wear. The HDPE screw lock fitting holds the two sections at the length you set.

The handle is the reach extension for a bullfloat head, so you can strike a slab off and float it level without stepping onto the wet concrete or working from your knees. The shorter closed length packs into a ute or trailer easily, and the screw lock means there is no loose pin or clip to lose on site.

Key Features

• Extends from 1300mm to 2400mm for standing bullfloat reach
• High quality extruded aluminium stays stiff over the span
• Fluted profile adds rigidity without adding weight
• Powdercoated finish for site durability
• HDPE screw lock fitting holds the set length
• Pairs with OX bullfloat heads

Specifications

• Extension range: 1300 to 2400mm
• Material: high quality extruded aluminium
• Finish: powdercoated
• Locking: HDPE screw lock fitting
• Profile: fluted

Applications

• Standing bullfloat passes on concrete slabs
• Striking off and leveling fresh concrete
• Reach finishing on footings and floors
• Large commercial slab pours
• Adjustable reach where a fixed handle is too short or too long

What You Need to Complete the Job

Mount an OX Professional 900mm aluminium bullfloat on this handle for the strike off pass, and keep the longer OX telescopic handle in the kit for the widest pours. Browse the Concreting Tools range for compatible heads and the rest of the finishing kit. Tighten the screw lock before each pass and check it when you extend the reach.

Frequently Asked Questions

What is this handle used for?

It is the reach handle for a concrete bullfloat. Mount a bullfloat head on it and you can strike a slab off and float it level while standing, without stepping onto the wet concrete. The 1300 to 2400mm range covers most slab widths and sets the working reach for the pass.

What bullfloat heads fit it?

The handle is designed for OX bullfloat heads, including the 900mm aluminium bullfloat in the range. Check the bracket fitting on your bullfloat matches the pole end before ordering. The HDPE screw lock holds the pole sections firmly so the head stays square to the slab.

How does the screw lock work?

The HDPE screw lock is a threaded collar that clamps the inner pole section at the length you choose. Twist it tight by hand and it holds through the pass; loosen it to slide the pole back down for storage or transport. It is the same fitting used across the OX handle range.