Hytile Wirerope 3 Section

The Hytile Wirerope 3 Section is the replacement cable assembly for a three-section Hytile roof tile elevator. It is supplied as a complete set covering the top section, two middle sections and the base section of the elevator, so the whole lifting cable can be replaced in one order. The cable is made from galvanised high-tensile steel and is pre-cut and ready to fit.

Key Features

• Complete cable assembly for a 3-section Hytile elevator
• Includes the top, two middle and base section cables
• Galvanised high-tensile steel for strength and corrosion resistance
• Pre-cut and ready to install on the elevator
• Reduces the risk of cable snapping, slippage or fraying
• Matches original Hytile equipment for a correct fit

Specifications

• Product: Hytile wirerope 3 section
• Configuration: top section, two middle sections, base section
• Material: galvanised high-tensile steel
• Application: 3-section Hytile roof tile elevator
• Finish: corrosion-resistant galvanisation

Why The Correct Cable Matters

The cable is the part of the elevator that carries the load, so it must be the right length, strength and fit for the machine. A three-section elevator needs the full set of cables, not a two-section cable, because each section carries its own part of the lifting path. Using the correct assembly keeps the elevator safe and prevents damage to the machine.

Applications

• Replacing a worn or frayed cable on a 3-section Hytile elevator
• Rebuilding a roof tile elevator after a cable failure
• Roofing contractors and tile installers using Hytile lifts
• Keeping the elevator operating safely on site

What You Need To Complete The Job

Pair the wirerope with the other spares that keep the elevator running. Add a cable elevator arms set to guide the cable and a Hytile elevator stand to mount the lift, and use the 2 section wirerope for a two-section machine. Browse the Roofing Accessories range for more spares.

Frequently Asked Questions

What is a 3 section wirerope?

It is the complete cable set for a three-section Hytile roof tile elevator. The set includes the top section cable, the two middle section cables and the base section cable, so the full lifting path can be replaced together.

Does it fit a 2 section elevator?

No. This cable set is for 3-section elevators only. A 2-section machine uses the Hytile Wirerope 2 Section. Check your elevator configuration before ordering so you get the right cable.

What material is the cable made from?

The cable is galvanised high-tensile steel, which gives it the strength to carry tile loads while resisting corrosion and weathering on site. The galvanised coating protects the steel in outdoor conditions.

Is it ready to install?

Yes. The cables are pre-cut to the correct length for the elevator sections and are ready to fit. Replace the worn cables with the new set and check the tension before using the lift.

Can I order for delivery or pickup?

Yes. You can order online and choose Australia-wide delivery or pickup from our Truganina trade counter in Melbourne’s west. Delivery windows depend on your postcode, and we send a confirmation once your order is ready. For any questions call (03) 93941400 or email orders@singhroofingsupplies.com.au.