Hytile Limit Switch

The Hytile Limit Switch is the safety control that stops a Hytile roof tile elevator at the top and bottom of its travel. It detects the end positions of the lift and cuts the motor before the elevator runs past its limits, which prevents mechanical overrun and damage. The switch is factory-assembled and works with the Hytile Stop and Go switch system.

Key Features

• Stops the elevator at the upper and lower limits of travel
• Prevents mechanical overrun and motor strain
• Works with the Hytile Stop and Go switch system
• Contact-based limit switch for reliable detection
• Standardised fitting for quick replacement
• Long-lasting construction for site conditions

Specifications

• Product: Hytile limit switch
• Application: Hytile roof tile elevator systems
• Compatibility: all current Hytile models
• Function: stops elevator travel at upper and lower limits
• Type: contact-based limit switch
• Integration: works with Stop and Go switch

Why The Limit Switch Matters

Without a working limit switch, an elevator can run past the end of its travel, which overloads the motor and strains the drive mechanism. The switch stops the lift at the correct position every time, so the drive, tiles and operator are all protected. It is a small part with a big safety role, and keeping a spare on hand avoids a shutdown.

Applications

• Stopping the elevator at its travel limits
• Replacing a worn or faulty limit switch
• Preventative maintenance on a Hytile lift
• Keeping roof tile transport safe and controlled

What You Need To Complete The Job

Pair the limit switch with the other elevator controls. Add a start button to power the lift, a lock stop button for emergency stop, and a bottom driver ring for the drive mechanism. Browse the Roofing Accessories range for more spares.

Frequently Asked Questions

What does a limit switch do on an elevator?

It detects when the elevator reaches the top or bottom of its travel and stops the motor before the machine runs past its limits. That prevents overrun, which can damage the drive mechanism and put the load at risk.

Will it work with my Hytile elevator?

The switch suits all current Hytile models and integrates with the Hytile Stop and Go switch system. If you are matching an existing machine, confirm the model before ordering.

How do I know when it needs replacing?

If the elevator does not stop at its limits, stops inconsistently, or the switch is physically damaged, replace it. A faulty limit switch should be fixed before the elevator is used again.

Is it hard to install?

No. The switch has a standardised fitting and is designed for quick replacement. Fit the new switch, check the stop positions, and the elevator is back in service.

Can I order for delivery or pickup?

Yes. You can order online and choose Australia-wide delivery or pickup from our Truganina trade counter in Melbourne’s west. Delivery windows depend on your postcode, and we send a confirmation once your order is ready. For any questions call (03) 93941400 or email orders@singhroofingsupplies.com.au.