Sutton H125 General Purpose Holesaw Set

The Sutton H125 general purpose holesaw set is the ten size kit for the trade person who wants the everyday holesaw range in one box. It holds bi-metal cobalt M42 saws in 16, 19, 22, 25, 29, 32, 35, 38, 44 and 51mm, covering the electrical, plumbing and general fabrication sizes that come up most. Every saw cuts to a 32mm depth and suits machine or hand drilling in steels, cast iron, non-ferrous metals, plastic and wood.

Key Features

• Ten sizes from 16mm to 51mm in one box
• Bi-metal HSS with cobalt for toughness and longer life
• Knock-out slots that aid core ejection
• Varied pitched teeth reduce vibration for greater performance and accuracy
• 32mm cutting depth across the set
• Suits machine or hand drilling

Specifications

• Set contents: 16, 19, 22, 25, 29, 32, 35, 38, 44 and 51mm
• Model: H125, general purpose set
• Material: bi-metal HSS with cobalt
• Cutting depth: 32mm
• Teeth: varied pitch
• Core ejection: knock-out slots
• Brand: Sutton Tools

Applications

• Electrical conduit and cable holes
• Plumbing pipe penetrations
• Timber, plywood and panel work
• Sheet metal and light fabrication
• General maintenance and site work

What You Need To Complete The Job

Drive the set with a Sutton quick fit arbor and a BD26 pilot drill, which fit every size in the box. For masonry, keep an SDS masonry drill on hand. The wider range is under Carpentry Tools.

Frequently Asked Questions

Which trade is this set aimed at?

The ten sizes cover the everyday range a general builder, handyman or maintenance fitter needs, from small electrical knockouts up to 51mm pipe holes. It sits between the smaller carpenter set and the bigger plumbers pro set, which makes it a good starting kit.

Do all ten saws fit the one arbor?

Yes. The H125 series uses the international thread standard, so the one quick fit arbor and the one BD26 pilot drill drive every size in the box. You swap the saw, not the arbor, which keeps the kit simple on the job.

What is the cutting depth of these saws?

The set is built to a 32mm cutting depth across all ten sizes. That covers sheet steel, timber framing, plywood and most panel work. For thicker material, drill through, clear the core, and finish from the far side.

Are the knock-out slots on every saw?

Yes. Every H125 saw in the set carries the knock-out slots that aid core ejection, and the varied pitched teeth run across the set too. The two features work together to keep the cut clean and make clearing the core quick.