Head Lap Clip 11

The Head Lap Clip 11 is a small roof tile clip that fixes tiles to the batten at the head lap, which is the point where the top of one tile overlaps the bottom of the tile above it. Its job is to hold that overlap down so strong wind cannot lift the tiles off the roof. It works on timber and metal battens and suits concrete and terracotta tiles, which makes it a useful general-purpose clip for new roofs, re-roofing and repairs.

Key Features

• Fixes roof tiles at the head lap to stop wind lift
• Works on timber battens and metal battens
• Suits concrete and terracotta roof tiles
• Bag of 100 pieces, box of 2000 for larger jobs
• Lightweight and compact, easy to carry on site
• Corrosion-resistant construction for a long service life

Specifications

• Product: Head Lap Clip 11
• Application: head lap tile fixing
• Compatibility: concrete and terracotta tiles, timber and metal battens
• Packaging: bag of 100 clips, box of 2000 clips
• Weight: 0.7 kg per bag of 100
• Dimensions: 16.0 x 14.0 x 4.5 cm per bag

Installation

Slide the clip over the head of the tile and hook it onto the batten below, then press it down so the tile is held against the batten. Fit clips at the head lap of every tile, or as the roof design requires, so the whole roof is held together against uplift. Because the clip grips the batten on both sides, it holds firm even where the tile has been cut short to fit.

Applications

• New tiled roof installations
• Re-roofing and roof repair work
• Roofs with metal battens where a screw-fixed clip is needed
• High-wind areas where tiles need extra hold

What You Need To Complete The Job

Match the Head Lap Clip with the other clips in the fixing family to finish the roof. Use Short Course Clips where tiles are cut short at ridge and hip, Staple Clips for fast fixing along the run, and Valley Clips to hold tiles in the valleys. Browse the full Roof Fixing Supplies range for sarking, bedding and pointing materials.

Frequently Asked Questions

What is a head lap clip used for?

A head lap clip holds the overlapping point of two roof tiles down against the batten. Wind can get under the head lap of a tile and lift it, and the clip stops that movement. It is a standard fixing on tiled roofs, especially in exposed or high-wind areas.

Does it work on metal battens?

Yes. The Head Lap Clip 11 grips the batten from both sides, so it holds on metal battens as well as timber. That makes it a practical choice on roofs where the battens are not wood.

Which tiles does it fit?

The clip suits concrete and terracotta roof tiles of standard profiles. If you are fixing a specific tile, check the head lap thickness against the clip opening before you order a full bag.

How many clips do I need?

That depends on the roof layout and the wind rating required. As a guide, count the tiles that need holding at the head lap and order a bag of 100 for a small job or a box of 2000 for a full roof. Your roof plan or the tile fixing schedule will give the exact count.

Can I order for delivery or pickup?

Yes. You can order online and choose Australia-wide delivery or pickup from our Truganina trade counter in Melbourne’s west. Delivery windows depend on your postcode, and we send a confirmation once your order is ready. For any questions call (03) 93941400 or email orders@singhroofingsupplies.com.au.