Epoxy Floor Coating Sterling Grey Kit 8L

The AutoTech epoxy floor coating Sterling Grey Kit is an 8L solvent-based two-pack system that seals and protects bare concrete in one coat. It dries to a clean, light neutral grey that suits garages, workshops and showrooms, and the finish resists the everyday wear that concrete floors cop: hot tyre pick-up, oil spills and tracked-in dirt. The whole system comes in one box, so the floor can be prepped, coated and finished in a single session.

Key Features

• One-coat application: the base and activator mix into a single protective layer
• Sterling Grey finish: a light neutral grey that brightens a garage or workshop
• Resists hot tyre pick-up, oil spills and general soiling
• Water beads on the surface and wipes clean, keeping the floor looking tidy
• Covers up to 40 m2 per 8L kit on bare concrete
• Kit contents: base, activator, concrete etch, decorative flakes, stirrer and instructions

Specifications

• Kit size: 8L two-pack (Part A base and Part B activator)
• Coverage: up to 40 m2 on bare concrete in a single coat
• Finish: solvent-based epoxy, one-coat, light neutral grey Sterling Grey
• Suitable surfaces: interior bare concrete floors
• In the box: base, activator, concrete etch, decorative flakes, stirrer, instructions

Applications

• Garage and workshop floors that want a lighter, cleaner look
• Showrooms and retail floors where the finish is part of the space
• Service bays and light industrial floors that need a tough surface
• Sheltered concrete areas such as patios and storage rooms

What You Need To Complete The Job

The kit is self-contained: clean the concrete, etch it with the included solution, mix Part A and Part B, and roll the coating on. For extra colour and grip, broadcast the grey blend decorative flakes into the wet coat, or use the blue blend flakes for a different look. Browse the full epoxy range for the other shades in this series.

Frequently Asked Questions

What is the difference between Sterling Grey and Manhattan?

Sterling Grey is a light neutral grey, while Manhattan is a smooth mid-tone grey and Carbon is a deep charcoal. The kits are otherwise identical: the same 8L two-pack format, the same coverage and the same one-coat application. Choose the shade that suits the room and the light.

How much floor does one kit cover?

The 8L kit covers up to 40 m2 on bare concrete in a single coat, about the size of a standard two-car garage. For larger floors, order two kits and roll each bay while the coating is still wet so the finish stays even.

What is in the kit?

Each kit includes the base (Part A), the activator (Part B), a concrete etch for surface preparation, a pack of decorative flakes, a stirrer and full instructions. The concrete must be clean, dry and etched before the epoxy is applied.

Is the finish easy to keep clean?

Yes. The surface resists oil and dirt and water beads on it, so a mop or cloth brings it back clean. That is what makes it a popular choice for garage floors that see cars and workshop work.

Do I need a primer?

No. This is a self-priming single-coat system. Prepare the floor, mix the two parts thoroughly, and roll the coating on in one pass.