Epoxy Floor Coating Carbon Kit 8L

The AutoTech epoxy floor coating Carbon Kit is an 8L solvent-based two-pack system that seals and protects bare concrete in one coat. It dries to a deep charcoal finish that suits garages, workshops and service areas where a darker floor hides the day-to-day scuffs of cars and equipment. The kit is self-priming, so there is no separate primer or topcoat, and one coat seals the concrete in a single pass.

Key Features

• One-coat application: the base and activator mix into a single protective layer
• Carbon finish: a deep charcoal tone that hides grime and suits industrial interiors
• Resists hot tyre pick-up, oil spills and fluid stains
• Water beads on the surface and wipes clean
• Covers up to 40 m2 per 8L kit on bare concrete
• Kit contents: base, activator, concrete etch, decorative flakes, stirrer and instructions

Specifications

• Kit size: 8L two-pack (Part A base and Part B activator)
• Coverage: up to 40 m2 on bare concrete in a single coat
• Finish: solvent-based epoxy, one-coat, deep charcoal Carbon
• Suitable surfaces: interior bare concrete floors
• In the box: base, activator, concrete etch, decorative flakes, stirrer, instructions

Applications

• Garage and workshop floors that want a darker, hard-wearing finish
• Service bays and light industrial floors subject to spills and vehicle traffic
• Showrooms and retail spaces after an industrial look
• Sheltered concrete floors where a dark protective coating is preferred

What You Need To Complete The Job

The kit includes everything for the job: the etch, the two-part coating and a pack of decorative flakes. Clean and etch the concrete, mix Part A and Part B, and roll the coating on in one coat. For a textured, slip-resistant finish, broadcast the grey blend decorative flakes into the wet coat, or try the blue blend flakes. See the full epoxy range for the other shades.

Frequently Asked Questions

Will a dark floor show dirt?

Dark finishes tend to hide dust, scuffs and oil marks better than light grey, which is one of the reasons Carbon is a popular choice for workshop and service floors. The surface still wipes clean easily with water beading on the coating.

How much floor does one kit cover?

The 8L kit covers up to 40 m2 on bare concrete in a single coat, about the size of a standard two-car garage. For a larger area, order two kits and roll in bays while the coating is wet so the finish stays even.

What is in the kit?

Each kit includes the base (Part A), the activator (Part B), a concrete etch for surface preparation, a pack of decorative flakes, a stirrer and full instructions. The concrete needs to be clean, dry and etched before the epoxy is applied.

Do I need a primer?

No. This is a self-priming single-coat system. Prepare the floor, mix the two parts thoroughly, and roll the coating on in one pass.

What colours are available?

The solvent-based epoxy range comes in three shades: Carbon, a deep charcoal; Manhattan, a smooth mid-tone grey; and Sterling Grey, a lighter neutral grey. Each kit is a complete system.