Overview

The V Grip Lance 900mm is the shorter stainless steel lance in the pressure washer range, built to fit a Meg nozzle to any 1/4 inch lance tube. At 900 mm it gives the reach to clean gutters, rooflines, plant and vehicle decks while staying short enough to handle in tight spaces, under trays and around equipment. The vented design keeps the handle steady when the trigger releases.

The stainless steel tubing gives the lance the strength for daily trade use without the corrosion problems of plain steel, and the V grip moulded handle is comfortable for gloved hands. It connects to the gun with a 1/4 inch BSP male inlet and takes the nozzle on a 1/4 inch NPT female outlet, matching the rest of the gun and lance range.

Key Features

• 900 mm vented stainless steel lance tube
• V grip moulded handle for gloved hands
• 1/4 inch BSP male inlet to suit the gun
• 1/4 inch NPT female outlet for the nozzle
• Rated to 3650 psi and 40 litres per minute
• 160C temperature rating
• Designed to fit a Meg nozzle to any 1/4 inch lance tube

Specifications

• Lance: 900 mm vented
• Inlet: 1/4 inch BSP male
• Outlet: 1/4 inch NPT female
• Performance: 40 litres per minute
• Pressure: 3650 psi
• Temperature: 160C
• Tubing: stainless steel

Applications

• Gutter, fascia and low roof cleaning
• Car, caravan and trailer washing
• Machinery and equipment cleaning in tight spaces
• Concrete pads and building washdown
• Trade pressure cleaning where a shorter lance is easier to control

What You Need to Complete the Job

Use the lance with a 5 piece nozzle kit to cover the spray angles, and run it from a pressure washer gun like the RL 37. If the hose keeps binding at the gun, a Vega gun with swivel solves it. See the Pressure Washers Accessories range for the rest of the kit.

Frequently Asked Questions

How is the 900 mm lance different from the 1200 mm?

It is the same construction and the same 3650 psi and 40 litres per minute rating, just shorter. The 900 mm length suits cleaning where the operator works close to the surface and the shorter reach is easier to control, such as car detailing, under trays and inside equipment bays.

What nozzle threads does it take?

The outlet is a 1/4 inch NPT female, the standard quick connect size for pressure washer nozzles. The 5 piece nozzle kit in the range covers 0, 15, 25, 40 and soap angles, all colour coded for quick selection.

Can it run on a hot water machine?

The lance is rated to 160C, which covers the hot water machines in the range that run up to 93C maximum. The stainless steel tube handles the hot water temperatures without the coating failures a painted lance would see.