Overview

The V Grip Lance 1200mm is a stainless steel pressure washer lance used to fit a Meg nozzle to any 1/4 inch lance tube. The 1200 mm vented tube gives the reach to clean rooflines, gutters, plant and vehicle decks without moving the machine or working off a ladder where a shorter lance will not reach. The stainless steel tubing resists corrosion, and the vented design keeps the handle from kicking back when the trigger releases.

The V grip handle shape is what the name describes: a moulded grip that an operator can hold comfortably with gloved hands, which matters on a lance used all day on commercial cleaning work. The lance connects to the gun through a 1/4 inch BSP male inlet and takes the nozzle on a 1/4 inch NPT female outlet, which is the common layout across the pressure washer range.

Key Features

• 1200 mm vented stainless steel lance tube
• V grip moulded handle for comfortable gloved use
• 1/4 inch BSP male inlet to suit the gun
• 1/4 inch NPT female outlet for the nozzle
• Rated to 3650 psi and 40 litres per minute
• Temperature rating to 160C
• Used to fit a Meg nozzle to any 1/4 inch lance tube

Specifications

• Lance: 1200 mm vented
• Inlet: 1/4 inch BSP male
• Outlet: 1/4 inch NPT female
• Performance: 40 litres per minute
• Pressure: 3650 psi
• Temperature: 160C
• Tubing: stainless steel

Applications

• Cleaning rooflines, gutters and fascias
• Truck, trailer and machinery washdown
• Building and concrete cleaning at height
• Car and equipment detailing
• Commercial pressure cleaning where reach is needed

What You Need to Complete the Job

Pair the lance with a 5 piece nozzle kit so you have the right spray angle for the surface, and run it from a pressure washer gun like the RL 37 for a full gun and lance setup. For a swivel fitting that keeps the hose from binding, the Vega gun with swivel is a direct match. See the Pressure Washers Accessories range for the rest of the kit.

Frequently Asked Questions

Which nozzle fits this lance?

The lance has a 1/4 inch NPT female outlet, which is the standard fitting for quick connect nozzles on pressure washers. The 5 piece nozzle kit in the range covers the common spray angles, and the listing notes the lance is designed to fit a Meg nozzle to any 1/4 inch lance tube.

What pressure is it rated for?

The listing states 3650 psi at 40 litres per minute. Match that to a machine in the same range, and stay within the rating for the lance so the fittings and the vented tube are not pushed beyond their working limit.

Is the stainless steel tube worth it on site?

Stainless steel resists the corrosion and knocks that a steel lance takes when it is leaned against plant, dropped on concrete or stored wet. It is heavier than an aluminium tube but far more durable, which is why the trade lances in the range are built from it.