Bremick Roofing Screws 6.2mm x 65mm

The Bremick 6.2mm x 65mm roofing screw is a roof zip screw built for fastening roofing sheets and flashings to timber battens or steel purlins up to 1.6mm thick. The hex head drives with a standard nutsetter, the timber and steel drill point cuts its own hole, and the B8 coating provides a hard, corrosion-resistant finish suited to exposed roofing. It is sold in packs of 100 and 500 to match the size of the job.

Key Features

• 6.2mm (M6) x 65mm roofing screw
• Timber and steel drill point, no pre-drilling up to 1.6mm steel
• Hex head, 5/16 (M8) hex nutsetter drive
• Bremick Revolution B8 coating for corrosion resistance
• Packs of 100 and 500

Specifications

• Product type: roofing screws (roof zips)
• Gauge / diameter: M6
• Length: 65mm
• Screw point: timber and steel drillers
• Head: hex, 5/16 (M8) drive
• Fixing into: timber or steel up to 1.6mm
• Material / coating: Bremick Revolution B8
• Brand: Bremick

Applications

• Fastening metal roofing sheets to timber battens
• Fixing roofing and cladding to steel purlins up to 1.6mm
• Flashings, ridges and roof accessories
• General roofing and cladding installation

What You Need To Complete The Job

For a shorter sheet fixing use the 6.2mm x 50mm roofing screw, and for a 25mm trim fixing the 6.2mm x 25mm version. Where battens themselves are being fixed, use roofing batten screws 12g x 40mm. Browse the full Screws range and the Metal Roofing range for the complete system.

Frequently Asked Questions

What does the drill point handle?

The timber and steel drill point cuts its own hole into timber battens or steel purlins up to 1.6mm thick, so there is no separate pilot drilling step on site.

Why choose B8 coating?

B8 is a hard, abrasion and scratch resistant alloy coating, significantly more durable than a conventional zinc or galvanised finish. That is what makes it suited to exposed roofing where the screw head takes weather and handling.

What pack size should I order?

The 100 pack suits a small roof or repairs, and the 500 pack covers a larger run. A typical house roof uses several hundred sheet fixings depending on the profile and spacing.

Do I need a seal under the head?

This listing is the plain hex head roof zip. Where the screw sits on the weather side of a sheet, use the version with an EPDM sealing washer to keep the fixing point watertight. See the Screws range for the sealed options.

Can I order for delivery or pickup?

Yes. You can order online and choose Australia-wide delivery or pickup from our Truganina trade counter in Melbourne’s west. Delivery windows depend on your postcode, and we send a confirmation once your order is ready. For any questions call (03) 93941400 or email orders@singhroofingsupplies.com.au.