Overview

The P&N Sheet Metal Grip Locking Pliers clamp sheet metal and flat stock with wide flat jaws that spread the pressure evenly. An adjustable locking mechanism sets the grip to the material thickness, and a quick release lever opens the jaws with one hand. They are built for bending, forming, holding and positioning sheet metal on the job.

Unlike a standard locking plier with narrow jaws, the wide flat face spreads the clamp force over the sheet instead of concentrating it on one point. That keeps the grip firm without crushing the edge or leaving a row of dimples, which matters when the sheet is going to be visible on a roof or a duct run.

Key Features

• Wide flat jaws spread clamping force without marking the surface
• Adjustable locking mechanism sets the grip to the material
• Quick release lever for one handed operation
• High strength steel construction
• Corrosion resistant coating for site conditions
• Available in 205mm and 250mm sizes

Specifications

• Lengths: 205mm and 250mm
• Jaw type: wide flat jaws
• Locking mechanism: adjustable lock and release lever
• Material: high strength steel
• Finish: corrosion resistant coating

Applications

• Holding sheet metal for bending and forming
• Aligning panels before fixing
• Securing workpieces during cutting or drilling
• Positioning flat stock for spot welding
• Clamping roof flashing and ridge capping in place while you fix it

What You Need to Complete the Job

Cut the sheet first with a pair of Midwest offset tinsnips, then clamp it with these pliers. Keep leather rigger gloves on for the sharp edges and see the Metal Roofing Tools range for more. For coated or painted sheet, add a soft jaw cover so the finish is not marked.

Frequently Asked Questions

What are sheet metal grip locking pliers used for?

They hold sheet metal and flat stock securely while you bend, form, position or fix it. The wide flat jaws grip without digging into the surface, and the locking mechanism keeps the clamp in place hands free so you can work with both hands on the sheet.

Do the jaws mark the metal?

The wide flat jaw face spreads the clamping force evenly across the sheet, which is designed to avoid the point marks you get from narrow jaws. For finished or coated sheet, use a soft jaw cover or a cloth shim for extra protection so the surface stays clean.

What sizes are available?

This listing covers two sizes: 205mm and 250mm overall length. The longer 250mm clamp suits larger sheets and heavier stock, while the 205mm is easier to handle in tight spots and is the size listed as the primary option on this page.