OX Pro Mini Bar Clamp Twin Pack 300mm

The OX Pro mini bar clamp twin pack gives you two 300mm (12 inch) clamps for larger gluing and assembly work. The clamps use strong engineering plastics that comply with the RoHS and REACH standards, with an induction hardened rail for strength and durability. The long leverage design delivers high clamping pressure with less effort, and each clamp converts quickly to a spreader for pushing work apart.

Key Features

• Twin pack of 300mm (12 inch) clamps
• Strong engineering plastics in compliance with RoHS and REACH
• Induction hardened rail for improved strength and durability
• Long leverage design for reaching high pressure easily
• Converts quickly to a spreader
• Optional version with extended cushions available

Specifications

• Capacity: 300mm (12 inch)
• Pack: twin pack (2 clamps)
• Rail: induction hardened steel
• Body: strong engineering plastics, RoHS and REACH compliant
• Convertible: to spreader

Applications

• Clamping larger glue ups and frames
• Holding panels and boards for assembly
• Edge clamping for laminating and edging
• Spreading work apart when converted

What You Need To Complete The Job

Pair the 300mm clamps with the 150mm twin pack for smaller work, and mark your layouts with carpenters pencils. For cutting parts to size, an Easy Start handsaw is a handy companion. The full range is under Carpentry Tools.

Frequently Asked Questions

What is the difference between the 150mm and 300mm clamps?

The two clamp sizes have the same design but different capacity: 150mm for smaller workpieces and 300mm for larger frames and panels. The twin packs mean you get two of each, which covers both ends of a glue up.

What is a 300mm mini bar clamp used for?

A 300mm mini bar clamp holds larger workpieces for gluing, assembly and fitting, where a 150mm clamp is too short. It suits frames, panels and boards up to 300mm across, and the twin pack covers both ends of a job.

How much pressure can these clamps apply?

The long leverage design lets you reach high clamping pressure by hand with less effort than a shorter clamp. The induction hardened rail keeps the clamp straight under load so the pressure stays even.

Can I convert the clamp to a spreader?

Yes. Slide the head around on the rail and reverse the jaw position to push work apart instead of pulling it together. The conversion is quick and needs no tools.

Are these clamps suitable for cabinet work?

Yes. The 300mm capacity and twin pack are well suited to cabinet assembly, edging and panel work. The soft jaw surfaces protect the timber while the clamp holds the joint tight.