Sutton H125 Plumbers Pro Holesaw Set

The Sutton H125 plumbers pro holesaw set is the big kit for the plumber who cuts holes across the full range of pipe and fitting work. It holds ten bi-metal cobalt M42 saws in 16, 19, 20, 22, 35, 44, 57, 63, 92 and 111mm, reaching all the way up to 111mm for vent and duct penetrations. Every saw cuts to a 32mm depth and suits machine or hand drilling in steels, cast iron, non-ferrous metals, plastic and wood.

Key Features

• Ten sizes from 16mm to 111mm in one box
• Bi-metal HSS with cobalt for toughness and longer life
• Knock-out slots that aid core ejection
• Varied pitched teeth reduce vibration for greater performance and accuracy
• 32mm cutting depth across the set
• Suits machine or hand drilling

Specifications

• Set contents: 16, 19, 20, 22, 35, 44, 57, 63, 92 and 111mm
• Model: H125, plumbers pro set
• Material: bi-metal HSS with cobalt
• Cutting depth: 32mm
• Teeth: varied pitch
• Core ejection: knock-out slots
• Brand: Sutton Tools

Applications

• Copper and PEX pipe penetrations through floors and walls
• Drainage and vent pipe holes
• Exhaust and duct openings in metal and timber
• Sanitary and waste pipe entries
• Commercial and domestic plumbing installs

What You Need To Complete The Job

Drive this set with a Sutton quick fit arbor and a BD26 pilot drill, which fit every size in the box. For masonry, keep an SDS masonry drill on hand. More trade tools are under Carpentry Tools.

Frequently Asked Questions

Why would a plumber pick the pro set?

Because it reaches the sizes a plumber actually cuts, including the larger 57, 63, 92 and 111mm holes for drainage, vent and exhaust penetrations, while still carrying the small 16 to 35mm sizes for pipe and fittings. One box covers the whole job.

Do the large sizes need a different arbor?

No. The H125 series uses the international thread standard across the set, so the one quick fit arbor and the one BD26 pilot drill drive every size from 16mm up to 111mm. You only change the saw, not the mounting.

Can these saws cut copper pipe holes?

Yes. The bi-metal cobalt HSS handles the non-ferrous metals, including copper, cleanly. For cutting through floors and joists around copper pipe, mark the hole carefully, use a sharp pilot, and back the work where you can for a clean exit.

What is the cutting depth of the set?

The whole set is built to a 32mm cutting depth. That covers timber floors, plywood, sheet steel and most panel work. For a deeper assembly, drill through, clear the core and finish from the far side.