Sutton H127 35mm TCT Multi-Purpose Holesaw

The Sutton H127 is the multi-purpose holesaw series in the Sutton range, and this 35mm size carries the tungsten carbide tipped teeth that give the series its TCT name. The saw is built for machine or hand drilling in steel, stainless steel, cast iron, non-ferrous metals, plastic and wood, and it cuts to a 32mm depth. The body is bi-metal cobalt HSS, the construction Sutton uses for toughness and longer life, and the carbide tips take the load on the cutting edge.

Key Features

• Tungsten carbide tipped teeth for multi-purpose cutting
• Bi-metal cobalt HSS body for toughness and longer life
• 32mm cutting depth
• International thread standard accepts all standard arbors
• Suits machine or hand held drilling
• Cuts steel, stainless steel, cast iron, non-ferrous metals, plastic and wood

Specifications

• Diameter: 35mm (1 3/8 inch)
• Model: H127, yellow label multi-purpose series
• Body: bi-metal cobalt HSS
• Cutting depth: 32mm
• Thread: international thread standard
• Arbor and pilot: UA3 or QFX arbor, BD24 or BD26 pilot drill

Applications

• Plumbing pipe penetrations through floors and cabinets
• Downlight and fitting holes in timber and plasterboard
• Ventilation and cable holes through steel
• Conduit entries for heavier cable
• General metal, timber and plastic cutting

What You Need To Complete The Job

Run this 35mm saw on a Sutton quick fit arbor with a BD26 pilot drill. In metal, keep a cutting lubricant on the cut; in concrete or brick, use an SDS masonry drill. More trade tools are under Carpentry Tools.

Frequently Asked Questions

What is a 35mm TCT holesaw used for?

A 35mm holesaw handles pipe penetrations around 32mm, downlight and fitting holes in timber and plasterboard, and conduit entries for heavier cable. The TCT tips make it a good multi-material choice when you are cutting steel one hour and hardwood the next.

Why choose carbide tipped over bi-metal?

Carbide tipped teeth keep their edge much longer on abrasive materials and across a wide mix of work, which is the point of a multi-purpose saw. Bi-metal is tougher against impact, but for a run of clean holes across steel, timber and plastic, the carbide edge earns its keep.

Can a hand drill drive this size?

Yes. A 35mm saw runs well in a standard corded or cordless drill in timber and sheet steel. Let the pilot start the hole, keep the feed steady, and use a moderate speed. In thicker plate, a heavier drill or a pillar drill is the better tool.

Does the yellow label mean anything?

The yellow label is the H127 TCT multi-purpose series colour coding, matching the wider Sutton tool range where colour codes group the application families. It makes the multi-purpose TCT saws easy to pick out of the holesaw drawer.