Sutton D501 6mm Spade Bit

The Sutton D501 is a 6mm spade bit, the smallest in the range, built for fast, clean holes in timber and light building materials. Sutton states the range drills up to 5 times faster than standard spade bits, with a power chip breaker and a heavy duty shank that clear the waste quickly and keep the bit running true. The 6mm size is a fine diameter for light cable and joinery work where a bigger hole would weaken the timber.

Key Features

• Up to 5 times faster than standard spade bits
• Power chip breaker clears waste for clean cutting
• Heavy duty shank for a firm grip in the chuck
• Increases efficiency and battery life of your power tool
• Clean cutting with minimal break out on exit
• Designed for timber and light building materials

Specifications

• Diameter: 6mm
• Model: D501
• Brand: Sutton Tools
• Shank: heavy duty
• Application: timber and light building materials
• Cutting design: power chip breaker

Applications

• Running light cable through timber
• Drilling fine holes in studs and framing
• Joinery and cabinet work
• Light building material work

What You Need To Complete The Job

A 6mm bit is the easiest spade bit in the range to drive, suited to a standard drill. For extra reach, fit a D502 spade bit extension, and for a full range the D501 3 piece set is the match. For masonry, use an SDS masonry drill instead. More cutting gear is under Carpentry Tools.

Frequently Asked Questions

What is a 6mm spade bit used for?

A 6mm spade bit drills fine holes in timber for light cable runs, joinery and cabinet work, and spots where a small hole keeps the timber strong. It is the smallest size in the D501 range and useful where a twist drill would wander.

Does a spade bit start its own hole?

Yes. The central point of a spade bit pulls it into the timber, so it starts its own hole without a separate pilot. Keep the drill square and let the point bite before feeding the full diameter.

Can I use a 6mm spade bit for dowel holes?

For joinery and cabinet work, a 6mm spade bit can drill clean dowel and fitting holes where you want a flat bottomed bore. It cuts fast and the point keeps it straight, which makes it a useful small bit for the workbench.

Why does a small spade bit need a chip breaker?

Even a 6mm bit makes waste that can clog the hole and slow the cut. The chip breaker breaks the waste into small pieces so it clears easily, which is what lets the whole D501 range cut up to 5 times faster than standard spade bits.