Sutton D501 32mm Spade Bit

The Sutton D501 is a 32mm spade bit built for fast, clean holes in timber and light building materials. Sutton states the range drills up to 5 times faster than standard spade bits, with a power chip breaker and a heavy duty shank that clear the waste quickly and keep the bit running true. The 32mm size is a large hole used for pipe runs and heavier penetrations through framing timber.

Key Features

• Up to 5 times faster than standard spade bits
• Power chip breaker clears waste for clean cutting
• Heavy duty shank for a firm grip in the chuck
• Increases efficiency and battery life of your power tool
• Clean cutting with minimal break out on exit
• Designed for timber and light building materials

Specifications

• Diameter: 32mm
• Model: D501
• Brand: Sutton Tools
• Shank: heavy duty
• Application: timber and light building materials
• Cutting design: power chip breaker

Applications

• Pipe and conduit runs through timber framing
• Drilling holes in studs and joists
• Plumbing and drainage entries
• General carpentry and site work

What You Need To Complete The Job

A 32mm bit wants a drill with strong torque. For deeper work, add a D502 300mm extension, and for a full range the D501 6 piece wallet set is the match. For masonry, use an SDS masonry drill instead. More cutting gear is under Carpentry Tools.

Frequently Asked Questions

What is a 32mm spade bit used for?

A 32mm spade bit drills the large holes needed for pipe, conduit and heavy cable runs through timber framing. It is a plumbing and electrical size for penetrations that need a bit more room than a 30mm hole.

Why use a spade bit instead of a holesaw at 32mm?

A spade bit cuts a solid bore in one pass and is quick to use for through holes in timber, while a holesaw cuts an annular hole and needs an arbor and pilot. For a plain round hole through a stud, a spade bit is the faster, simpler tool.

Can I run this bit on an extension?

Yes. The D502 extension shanks increase the reach of spade bits 19mm and over, and the 32mm bit works with the 300mm extension for deeper runs through walls and floors.

How do I avoid burning the timber on a 32mm hole?

Back the bit out part way to clear the sawdust, feed steadily, and let the chip breaker do its job. A sharp bit at a moderate speed cuts cleanly without burning the wood, and easing off at the far side stops the hole tearing out.