Sutton D501 14mm Spade Bit

The Sutton D501 is a 14mm spade bit built for fast, clean holes in timber and light building materials. Sutton states the range drills up to 5 times faster than standard spade bits, with a power chip breaker and a heavy duty shank that clear the waste quickly and keep the bit running true. The 14mm size is a handy everyday diameter for cable runs and general carpentry holes in framing timber.

Key Features

• Up to 5 times faster than standard spade bits
• Power chip breaker clears waste for clean cutting
• Heavy duty shank for a firm grip in the chuck
• Increases efficiency and battery life of your power tool
• Clean cutting with minimal break out on exit
• Designed for timber and light building materials

Specifications

• Diameter: 14mm
• Model: D501
• Brand: Sutton Tools
• Shank: heavy duty
• Application: timber and light building materials
• Cutting design: power chip breaker

Applications

• Running cable and conduit through timber
• Drilling holes in studs and framing
• General carpentry and joinery holes
• Light building material work

What You Need To Complete The Job

A 14mm bit is easy to drive in a standard drill. For extra reach, fit a D502 spade bit extension, and for a full range the D501 3 piece set is the match. For concrete or brick, use an SDS masonry drill instead. More cutting gear is under Carpentry Tools.

Frequently Asked Questions

What is a 14mm spade bit used for?

A 14mm spade bit is a general purpose wood drilling size, used for cable and conduit runs through timber, holes in studs and framing, and everyday carpentry. It is a useful in between size when 12mm is too tight and 16mm is more than needed.

Can I use a spade bit for holes in door frames?

Yes. A 14mm bit is a good size for running cable through door frames and architraves, and for the holes that carry fittings and hardware. The clean cutting design keeps the hole round and the edges tidy in the softer timber.

Why does a chip breaker make the bit faster?

Standard spade bits push a solid curl of waste that drags and slows the cut. The chip breaker breaks that waste into smaller pieces, so it clears the hole easily and the bit keeps cutting at speed. That is where the up to 5 times faster rating comes from.

Will this bit suit a cordless drill?

Yes. The D501 is designed to increase the efficiency and battery life of your power tool, so it runs well in a cordless drill. A standard 18V drill with decent torque will drive a 14mm bit through framing timber without struggling.