Overview

The Holman 12mm Hose Connector is the everyday end fitting that gives a plain hose a snap on connection. It uses Grip N Lock technology, where a separate olive clamps tightly on the hose and compresses it behind the barb on the fitting spigot. The two together form a connection that will not fail, so the fitting stays on the hose and on the tap under pressure.

This is the plastic version of the brass connector, sold at a lower price for everyday garden use. The lock mechanism lets you connect or disconnect a nozzle, gun or another hose quickly, and the snap on fitting works with the rest of the 12mm range.

Key Features

• Grip N Lock technology, will not blow off the hose or tap
• Separate olive clamps tightly on the hose
• High compression for a firm hold
• Connect or disconnect with the lock mechanism
• Snap on connector

Specifications

• Fitting size: 12mm
• Connection: snap on with lock mechanism
• Body: plastic
• Fixing: separate olive with high compression
• Brand: Holman

Applications

• Fitting a snap on end to a plain hose
• Replacing a worn hose end fitting
• Connecting a hose to a nozzle, gun or sprinkler
• Building a tap to reel hose with two connectors
• Everyday garden hose setup

What You Need to Complete the Job

Use two connectors with a 12mm multi purpose hose to build a tap to reel hose, and add a metal power nozzle for the spray end. See the Fittings range for the brass version and tap adaptors.

Frequently Asked Questions

How does this connector hold the hose?

The fitting uses a separate olive with sharp teeth that clamps onto the outside of the hose. When the connector is tightened, the olive compresses the hose behind the barb on the spigot, and the combination holds the hose firmly so it does not pull off under water pressure.

Can I use this to build a tap to reel hose?

Yes. This is the connector you need to build a short tap to reel hose for a portable reel. You fit one connector to each end of a short length of 12mm hose, clip one end to the reel and the other to a tap adaptor on the garden tap.

What is the difference between this and the brass connector?

The fitting design is the same Grip N Lock technology, but this connector has a plastic body while the brass version is machined from brass. The brass version is heavier and more corrosion resistant for harsh or commercial use, while the plastic version is a lower cost everyday fitting.