Round Downpipe Clips from Singh Roofing Supplies are purpose-built fixings that secure circular rainwater pipes firmly to walls, posts or masonry without compromising the clean lines of your façade. Pressed from high-tensile, corrosion-resistant steel and finished in the full COLORBOND® palette or zinc-coated galvanised, these clips keep downpipes aligned, rattle-free and able to handle seasonal expansion and contraction.

Unlike generic straps that can distort thin-wall pipes, each clip is profile-matched to the outside diameter of standard Australian round downpipes. A single screw or masonry anchor through the centre boss locks the saddle tight; the folded side ears prevent rotation, so the pipe stays vertical even in high-wind zones.

Core advantages

Precision fit for 75 mm, 90 mm and 100 mm round downpipes
Pre-punched fixing hole for quick, accurate installation
Heavy-duty 0.55 mm steel resists bending and vibration
Rounded edges protect painted pipe surfaces from abrasion
Durable finishes—galvanised for rural builds, COLORBOND® for colour-matched façades

Specification table

Clip size	Outside pipe Ø	Finish options*	Typical clip spacing**
75 mm	75 mm	Galvanised, Classic colours	1.8 m centres
90 mm	90 mm	Galvanised, Classic, Matt, Ultra	2.0 m centres
100 mm	100 mm	Galvanised, Classic colours	2.0 m centres

*COLORBOND® finishes are supplied in the same solid and matt tones as gutters and fascia for a cohesive appearance.
**Clip spacing based on AS/NZS 3500 guidelines; closer centres may be required on very tall runs or cyclone sites.

Installation outline

Plumb the downpipe and mark clip positions to suit the recommended spacing.
Pre-drill the substrate if fixing into hardwood or masonry.
Fit the clip around the pipe, align the fixing hole and drive a 10 g screw or 6 mm masonry anchor until the saddle seats snugly—avoid overtightening.
Seal fastener heads with matching touch-up paint where coastal exposure is expected.

Where to use

Round Downpipe Clips are suitable for new roofs, re-roofing projects and repairs on domestic dwellings, multi-unit developments, sheds, schools and light commercial buildings. They are fully compatible with Singh Roofing Supplies’ range of round downpipes, elbows, shoes and rainwater heads, ensuring a single-source solution for the entire drainage line.

Ordering and availability

Clips are sold individually or in trade packs of 100. Specify diameter and finish when ordering to guarantee a perfect match with your pipework and façade colour scheme.

Keep your rainwater system straight, secure and visually refined with Round Downpipe Clips from Singh Roofing Supplies—engineered for reliability, finished for style.

Size	75mm, 90mm, 100mm
Colour	Basalt, Bluegum, Classic Cream, Cottage Green, Deep Ocean, Dover White, Dune, Evening Haze, Gully, Ironstone, Jasper, Manor Red, Monument, Night Sky, Pale Eucalypt, Paperbark, Shale Gray, Southerly, Surfmist, Wallaby, Windspray, Woodland Grey, Zinc